[PCB_FORUM] Re: mouse change w/15.5

How do you read them into Cadence?


----- Original Message ----
From: Jean Louison <jean.louison@xxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Saturday, May 6, 2006 3:50:19 AM
Subject: [PCB_FORUM] Re: mouse change w/15.5


You can use this file:
I had "Mentor like" strokes with sted tool.
Jean.
 
----- Original Message ----- 
From: Bolman, Shirley H 
To: icu-pcb-forum@xxxxxxxxxxxxx 
Sent: Friday, May 05, 2006 9:21 PM
Subject: [PCB_FORUM] Re: mouse change w/15.5


In a previous life, I was doing schematic entry in Mentor and learned the 
"strokes"!
Wow they were just great. Once you get used to them they are very powerful.
 
When I started up on Cadence I found they had only a few strokes and most of 
them
didn't work well so I went back to using function keys for the basic things. Of 
course
it doesn't help much that Cadence follows the Select a process then select the 
thing the 
process is to affect. Whereas Mentor you select the item, then tell it what 
process you want to
use. 
 
One of these days I will train my Cadence tool how to use strokes better but as 
a librarian
there are only a few basic things I need now.
 
Shirley in Oregon




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of lthemanz
Sent: Friday, May 05, 2006 1:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: mouse change w/15.5


I've seen those strokes performed by Mentor users, and it works really fast. 
Some of them look like ninja's just stroking their mouse. 

----- Original Message ----
From: David Greig <david@xxxxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Saturday, February 18, 2006 1:49:53 AM
Subject: [PCB_FORUM] Re: mouse change w/15.5


Hope xyz@xxxxxxxxxx reads my posting when they get back into their office!
 
 
Best Regards
 
David Greig
______________________________
GigaDyne Ltd
Buchan House
Carnegie Campus
Dunfermline KY11 8PL
United Kingdom
t: +44 (0)1383 624 975
www.gigadyne.co.uk
______________________________
 




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
Sent: 17 February 2006 17:15
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: mouse change w/15.5


LOL... the Mentor people think "strokes" are the best thing since sliced bread. 
 
 
Give me configurable keyboard control anyday.
-----Original Message-----
From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Greig
Sent: Friday, February 17, 2006 1:24 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: mouse change w/15.5


env variable,  "unset no_dynamic_zoom"
 
why on earth it's even an option? about as much use as strokes.
 
Best Regards
 
David Greig
______________________________
GigaDyne Ltd
Buchan House
Carnegie Campus
Dunfermline KY11 8PL
United Kingdom
t: +44 (0)1383 624 975
www.gigadyne.co.uk
______________________________
 




From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary MacIndoe
Sent: 16 February 2006 21:34
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] mouse change w/15.5


Hey guys,
 
Im not sure whats going on with my mouse, or if its even a result of upgrading 
to 15.5.
 
Before, while on 15.2, clicking the middle mouse button would continue zooming 
in if I had just zoomed in.
If I had just zoomed out, the middle mouse button would continue the zooming 
out when clicked.
 
Now, clicking the middle mouse button zooms me in, whether I just zoomed out or 
in.
 
Not a big deal, but anyone have any clues as to where this is set?
 
Thanks!
 
Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices
Longmont, Colorado
 


-- 
Virus scanned by Lumison.





-- 
Virus scanned by Lumison.





---------------------------------------------------------------------------------------
Wanadoo vous informe que cet e-mail a ete controle par l'anti-virus mail.
Aucun virus connu a ce jour par nos services n'a ete detecte.

Other related posts: