[PCB_FORUM] Re: mouse change w/15.5

You can use this file:
I had "Mentor like" strokes with sted tool.
Jean.

  ----- Original Message ----- 
  From: Bolman, Shirley H 
  To: icu-pcb-forum@xxxxxxxxxxxxx 
  Sent: Friday, May 05, 2006 9:21 PM
  Subject: [PCB_FORUM] Re: mouse change w/15.5


  In a previous life, I was doing schematic entry in Mentor and learned the 
"strokes"!
  Wow they were just great. Once you get used to them they are very powerful.

  When I started up on Cadence I found they had only a few strokes and most of 
them
  didn't work well so I went back to using function keys for the basic things. 
Of course
  it doesn't help much that Cadence follows the Select a process then select 
the thing the 
  process is to affect. Whereas Mentor you select the item, then tell it what 
process you want to
  use. 

  One of these days I will train my Cadence tool how to use strokes better but 
as a librarian
  there are only a few basic things I need now.

  Shirley in Oregon



------------------------------------------------------------------------------
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of lthemanz
  Sent: Friday, May 05, 2006 1:17 AM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: mouse change w/15.5


  I've seen those strokes performed by Mentor users, and it works really fast. 
Some of them look like ninja's just stroking their mouse. 

  ----- Original Message ----
  From: David Greig <david@xxxxxxxxxxxxxx>
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Sent: Saturday, February 18, 2006 1:49:53 AM
  Subject: [PCB_FORUM] Re: mouse change w/15.5


  Hope xyz@xxxxxxxxxx reads my posting when they get back into their office!


  Best Regards

  David Greig
  ______________________________
  GigaDyne Ltd
  Buchan House
  Carnegie Campus
  Dunfermline KY11 8PL
  United Kingdom
  t: +44 (0)1383 624 975
  www.gigadyne.co.uk
  ______________________________




------------------------------------------------------------------------------
  From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
  Sent: 17 February 2006 17:15
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] Re: mouse change w/15.5


  LOL... the Mentor people think "strokes" are the best thing since sliced 
bread.  

  Give me configurable keyboard control anyday.
    -----Original Message-----
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Greig
    Sent: Friday, February 17, 2006 1:24 AM
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] Re: mouse change w/15.5


    env variable,  "unset no_dynamic_zoom"

    why on earth it's even an option? about as much use as strokes.

    Best Regards

    David Greig
    ______________________________
    GigaDyne Ltd
    Buchan House
    Carnegie Campus
    Dunfermline KY11 8PL
    United Kingdom
    t: +44 (0)1383 624 975
    www.gigadyne.co.uk
    ______________________________




----------------------------------------------------------------------------
    From: icu-pcb-forum-bounce@xxxxxxxxxxxxx 
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary MacIndoe
    Sent: 16 February 2006 21:34
    To: icu-pcb-forum@xxxxxxxxxxxxx
    Subject: [PCB_FORUM] mouse change w/15.5


    Hey guys,



    I'm not sure what's going on with my mouse, or if it's even a result of 
upgrading to 15.5.



    Before, while on 15.2, clicking the middle mouse button would continue 
zooming in if I had just zoomed in.

    If I had just zoomed out, the middle mouse button would continue the 
zooming out when clicked.



    Now, clicking the middle mouse button zooms me in, whether I just zoomed 
out or in.



    Not a big deal, but anyone have any clues as to where this is set?



    Thanks!



    Gary E. MacIndoe

    PCB Design Engineer

    Advanced Micro Devices

    Longmont, Colorado





-- 
Virus scanned by Lumison.




-- 
Virus scanned by Lumison.




  
---------------------------------------------------------------------------------------
  Wanadoo vous informe que cet e-mail a ete controle par l'anti-virus mail.
  Aucun virus connu a ce jour par nos services n'a ete detecte.

Other related posts: