[PCB_FORUM] Re: mouse change w/15.5

In a previous life, I was doing schematic entry in Mentor and learned
the "strokes"!
Wow they were just great. Once you get used to them they are very
powerful.
 
When I started up on Cadence I found they had only a few strokes and
most of them
didn't work well so I went back to using function keys for the basic
things. Of course
it doesn't help much that Cadence follows the Select a process then
select the thing the 
process is to affect. Whereas Mentor you select the item, then tell it
what process you want to
use. 
 
One of these days I will train my Cadence tool how to use strokes better
but as a librarian
there are only a few basic things I need now.
 
Shirley in Oregon

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of lthemanz
Sent: Friday, May 05, 2006 1:17 AM
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: mouse change w/15.5


I've seen those strokes performed by Mentor users, and it works really
fast. Some of them look like ninja's just stroking their mouse. 

----- Original Message ----
From: David Greig <david@xxxxxxxxxxxxxx>
To: icu-pcb-forum@xxxxxxxxxxxxx
Sent: Saturday, February 18, 2006 1:49:53 AM
Subject: [PCB_FORUM] Re: mouse change w/15.5


Hope xyz@xxxxxxxxxx reads my posting when they get back into their
office!
 
 
Best Regards
 
David Greig
______________________________
GigaDyne Ltd
Buchan House
Carnegie Campus
Dunfermline KY11 8PL
United Kingdom
t: +44 (0)1383 624 975
www.gigadyne.co.uk <http://www.gigadyne.co.uk/> 
______________________________
 

________________________________

From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gene Carman
Sent: 17 February 2006 17:15
To: icu-pcb-forum@xxxxxxxxxxxxx
Subject: [PCB_FORUM] Re: mouse change w/15.5


LOL... the Mentor people think "strokes" are the best thing since sliced
bread.  
 
Give me configurable keyboard control anyday.

        -----Original Message-----
        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx]On Behalf Of David Greig
        Sent: Friday, February 17, 2006 1:24 AM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Re: mouse change w/15.5
        
        
        env variable,  "unset no_dynamic_zoom"
         
        why on earth it's even an option? about as much use as strokes.
         
        Best Regards
         
        David Greig
        ______________________________
        
        GigaDyne Ltd
        Buchan House
        Carnegie Campus
        Dunfermline KY11 8PL
        United Kingdom
        t: +44 (0)1383 624 975
        www.gigadyne.co.uk <http://www.gigadyne.co.uk/> 
        ______________________________
         

________________________________

        From: icu-pcb-forum-bounce@xxxxxxxxxxxxx
[mailto:icu-pcb-forum-bounce@xxxxxxxxxxxxx] On Behalf Of Gary MacIndoe
        Sent: 16 February 2006 21:34
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] mouse change w/15.5
        
        

        Hey guys,

         

        I'm not sure what's going on with my mouse, or if it's even a
result of upgrading to 15.5.

         

        Before, while on 15.2, clicking the middle mouse button would
continue zooming in if I had just zoomed in.

        If I had just zoomed out, the middle mouse button would continue
the zooming out when clicked.

         

        Now, clicking the middle mouse button zooms me in, whether I
just zoomed out or in.

         

        Not a big deal, but anyone have any clues as to where this is
set?

         

        Thanks!

         

        Gary E. MacIndoe

        PCB Design Engineer

        Advanced Micro Devices

        Longmont, Colorado

         


        -- 
        Virus scanned by Lumison.



-- 
Virus scanned by Lumison.

Other related posts: