[haiku-development] Re: Making updated partition bootable
- From: Stephan Assmus <superstippi@xxxxxx>
- To: haiku-development@xxxxxxxxxxxxx
- Date: Thu, 27 Aug 2009 09:24:04 +0200
Hi,
On 2009-08-27 at 02:10:47 [+0200], Michael Lotz <mmlr@xxxxxxxx> wrote:
> > Since my last post (and another KDL) I looked at the syslog from the
> > debugger, and all the pre-crash lines are "IDE:"! So it can't be that
> > it's actually using ATA instead (or can it? ATA isn't emulating IDE or
> > something, is it?)
>
> Just to make sure, you have nothing laying around from the old install,
> right? If you only copy over the new stuff and leave the old stuff in
> place you can end up having both ATA and IDE installed. That's not a good
> situation.
If I haven't screwed this up, the Installer purges the system folder before
installing to a non-empty volume. At least via an option (alert), but I
don't remember right now.
> Note though that there are a few lines that start with "PCI-IDE:" in both
> stacks because they come from the adapter code that hasn't been updated
> in that regard.
Hm, I would think I caught all "IDE" strings... :-)
Best regards,
-Stephan
Other related posts:
