The other parameter of REALM that you may be interested is: ROCTIM: Rate of Change Time is the number of minutes that the measurement's= rate of change must remain greater than the rate of change limit, ROCLIM, before the block generates an alarm. It is also the length of time that the rate of change must remain below the limit to come out of alarm. Leonardo Moramarco Instructor, Lifetime Learning Center Invensys Systems Canada Inc. Foxboro Division Phone: 514.421.8301 Fax:514.421.8059 Cell:514.942.4342 = Le pr=E9sent courriel et tout fichier joint =E0 celui-ci peuvent contenir d= es renseignements confidentiels ou privil=E9gi=E9s. Si cet envoi ne s'adres= se pas =E0 vous ou si vous l'avez re=E7u par erreur, vous devez l'effacer. = Vous ne pouvez conserver, distribuer, communiquer ou utiliser les renseigne= ments qu'il contient. Nous vous prions de nous signaler l'erreur par courri= el. Merci de votre collaboration. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On= Behalf Of Jaudon, Mike Sent: Friday, May 04, 2007 11:28 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Rate of Change Alarming Thanks Brad. I understand better how the ROC works now BUT...as the "clients of the D.C. Madam" say, here's what I really want is... if that 1.67 Deg/sec rate is sustained for 5 minutes then alarm. Is there an easy way of doing that without bringing that "alarm bit" into a logic block and "DON" for 5 minutes? Regards, Michael L. Jaudon TRONOX, LLC (Technology Group-Hamilton, MS) (662)343-8710 Office (662)304-0313 Cell mike.jaudon@xxxxxxxxxx If you are not the intended recipient of this e-mail message, any use, distribution or copying of the message is prohibited. Please let me know immediately by return e-mail if you have received this message by mistake, then delete the e-mail message. Thank you. -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Wilson, Brad Sent: Friday, May 04, 2007 10:08 AM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] Rate of Change Alarming I just did a test with a RAMP and REALM and it worked as expected. The trick is to get the units correct ... the RAMP.OUT is units/min and the REALM.ROCVAL is units/sec. When I RAMPed at 50 %/min it showed up on the REALM.ROCVAL as 0.833 %/sec. In your case I would try Make your REALM input scaling the same as the AIN that feeds it REALM.ROCLIM =3D3D3D 1.67 (deg F/sec or 500 deg in 5 min) REALM.ROCTIM =3D3D3D 5 (mins) REALM.ROCOPT =3D3D3D 1 (enable ROC alarming) Now, this will alarm if the instantaneous rate ever goes over 1.67 deg/sec. ROC alarming is absolute value, so you'll also get an alarm if it falls 1.67 deg/sec. You might be able to "dampen" the alarming by using a filter in the AIN block, but that is questionable. Brad Wilson brad.wilson@xxxxxxxxxxxxxxxx Invensys Systems, Inc 1090 King Georges Post Rd, Suite 204 Edison, NJ 08837 732-874-0087 -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Jaudon, Mike Sent: Friday, May 04, 2007 10:40 AM To: foxboro@xxxxxxxxxxxxx Subject: [foxboro] Rate of Change Alarming List, =3D3D Can anyone tell me how and what to set on a REALM block to make the ROC work? In the past I have set up on a test bed and used a RAMP block to test but it never works as I think it should. =3D3D I want an alarm to be generated when the temperature goes up 500 DegF in 5 minutes. The temp normally operates at a constant value but if it increases by the 500 Degrees within 5 minutes then I want an alarm. =3D3D In the past I have accomplished this by building two AIN blocks and changing the "period" on one and sending these to a REALM block (MEAS & DEVSPT). One problem I have now is there is no period with a 5 minute execution. Besides if I could configure the REALM correctly I would only have to create one block instead of two. =3D3D Anyone with any ideas? Michael L. Jaudon =3D3D TRONOX, LLC =3D3D (Technology Group-Hamilton, MS) =3D3D (662)343-8710 Office =3D3D (662)304-0313 Cell =3D3D mike.jaudon@xxxxxxxxxx =3D3D If you are not the intended recipient of this e-mail message, any use, distribution or copying of the message is prohibited. Please let me know immediately by return e-mail if you have received this message by mistake, then delete the e-mail message. Thank you. =3D3D =3D3D =3D3D _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =3D3D foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3D3Dleave =3D3D Confidentiality Notice: The information contained in this electronic message and any attachment(s) =3D3D to this message are intended for the exclusive use of the recipient(s) and =3D3D may contain confidential, privileged or proprietary information. If you are=3D3D not the intended recipient, please notify the sender immediately, delete a=3D3D ll copies of this message and any attachment(s). Any other use of the E-Mai=3D3D l by you is prohibited. =3D20 =3D20 _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html =3D20 foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: =3D mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Djoin to unsubscribe: =3D mailto:foxboro-request@xxxxxxxxxxxxx?subject=3D3Dleave =3D20 = = _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html = foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave = Confidentiality Notice: The information contained in this electronic message and any attachment(s) = to this message are intended for the exclusive use of the recipient(s) and = may contain confidential, privileged or proprietary information. If you are= not the intended recipient, please notify the sender immediately, delete a= ll copies of this message and any attachment(s). Any other use of the E-Mai= l by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave