Re: [foxboro] Peer to Peer connection good but not updating
- From: Michael Kessler <mkessler@xxxxxxxxxxxxx>
- To: foxboro@xxxxxxxxxxxxx
- Date: Mon, 27 Aug 2012 14:50:48 -0400
Thanks for the fix, connections restored.
I've poked around in rsom and see a number of points labelled "No response
0000". Does this mean I have more broken connections that I don't yet know
about. If so is there any way to figure out what tags these are referring
to.
mk
On Mon, Aug 27, 2012 at 12:55 PM, Johnson, Alex P (IOM) <
Alex.Johnson@xxxxxxxxxxxx> wrote:
> I hit send to quickly:
>
> Before you do that, would you:
>
> 1) Break the problem link or links
> 2) Checkpoint
> 3) Restore the problem link or links
> 4) Checkpoint
>
> The checkpoint command among other things reconnects OM p2p. The procedure
> above is likely going to solve the problem without requiring a station
> reboot.
>
> Checkpointing the source CP should not be necessary, but it shouldn't hurt
> either. :)
>
> Regards,
>
> Alex Johnson
> Invensys Operations Management
> 10900 Equity Drive
> Houston, TX 77041
> +1 713 329 8472 (desk)
> +1 713 329 1600 (operator)
> +1 713 329 1700 (Central Fax)
> alex.johnson@xxxxxxxxxxxx
>
>
> -----Original Message-----
> From: Johnson, Alex P (IOM)
> Sent: Monday, August 27, 2012 11:54 AM
> To: 'foxboro'
> Subject: RE: [foxboro] Peer to Peer connection good but not updating
>
> A reboot of both stations will definitely clear the OM lists out, but you
> have to reboot both sides at once.
>
> Before you do that, would you:
>
> 1) Break the problem link or links
> 2) Checkpoint
> 3) Restore the problem link or links
> 4) Checkpoint
>
> The checkpoint command among other things reconnects OM p2p. The procedure
> above is likely going to solve the problem without requiring a station
> reboot.
>
>
>
> Regards,
>
> Alex Johnson
> Invensys Operations Management
> 10900 Equity Drive
> Houston, TX 77041
> +1 713 329 8472 (desk)
> +1 713 329 1600 (operator)
> +1 713 329 1700 (Central Fax)
> alex.johnson@xxxxxxxxxxxx
>
>
> -----Original Message-----
> From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
> On Behalf Of Michael Kessler
> Sent: Monday, August 27, 2012 11:46 AM
> To: foxboro
> Subject: [foxboro] Peer to Peer connection good but not updating
>
> I have some peer to peer connections between calcA blocks in ZCP's that are
> not updating. (XXX.BO01 > YYY.BI01) I've deleted/undeleted the blocks,
> with no success. Deleting the source block does not turn the sink point
> Cyan which should normally be the case.
> I am able to see the status of the source using omget.
> I suspect corrupt OM lists. Will a re-boot clear these up or is a CP
> initialize/loadall required?
>
> Anyone experienced this type of problem?
>
> mk
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
>
> *** Confidentiality Notice: This e-mail, including any associated or
> attached files, is intended solely for the individual or entity to which it
> is addressed. This e-mail is confidential and may well also be legally
> privileged. If you have received it in error, you are on notice of its
> status. Please notify the sender immediately by reply e-mail and then
> delete this message from your system. Please do not copy it or use it for
> any purposes, or disclose its contents to any other person. This email
> comes from a division of the Invensys Group, owned by Invensys plc, which
> is a company registered in England and Wales with its registered office at
> 3rd Floor, 40 Grosvenor Place, London, SW1X 7AW (Registered number 166023).
> For a list of European legal entities within the Invensys Group, please go
> to http://www.invensys.com/en/legal/default.aspx.
>
> You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
> reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be
> subject to the terms of any agreements between Invensys (and/or its
> subsidiaries and affiliates) and the recipient (and/or its subsidiaries and
> affiliates).
>
>
>
>
> _______________________________________________________________________
> This mailing list is neither sponsored nor endorsed by Invensys Process
> Systems (formerly The Foxboro Company). Use the info you obtain here at
> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>
> foxboro mailing list: //www.freelists.org/list/foxboro
> to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
> to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>
>
--
Michael Kessler,P.Eng
KIC Engineered Systems
435 Huron St, London, On
N5Y 4J4
(519) 488-5317 Office
(519) 672-2299 Fax
www.kicsystems.ca
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
