Re: [foxboro] Peer to Peer connection good but not updating
- From: "Johnson, Alex P (IOM)" <Alex.Johnson@xxxxxxxxxxxx>
- To: 'foxboro' <foxboro@xxxxxxxxxxxxx>
- Date: Mon, 27 Aug 2012 11:54:26 -0500
A reboot of both stations will definitely clear the OM lists out, but you have
to reboot both sides at once.
Before you do that, would you:
1) Break the problem link or links
2) Checkpoint
3) Restore the problem link or links
4) Checkpoint
The checkpoint command among other things reconnects OM p2p. The procedure
above is likely going to solve the problem without requiring a station reboot.
Regards,
Alex Johnson
Invensys Operations Management
10900 Equity Drive
Houston, TX 77041
+1 713 329 8472 (desk)
+1 713 329 1600 (operator)
+1 713 329 1700 (Central Fax)
alex.johnson@xxxxxxxxxxxx
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Michael Kessler
Sent: Monday, August 27, 2012 11:46 AM
To: foxboro
Subject: [foxboro] Peer to Peer connection good but not updating
I have some peer to peer connections between calcA blocks in ZCP's that are
not updating. (XXX.BO01 > YYY.BI01) I've deleted/undeleted the blocks,
with no success. Deleting the source block does not turn the sink point
Cyan which should normally be the case.
I am able to see the status of the source using omget.
I suspect corrupt OM lists. Will a re-boot clear these up or is a CP
initialize/loadall required?
Anyone experienced this type of problem?
mk
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person. This email comes from a division of the Invensys
Group, owned by Invensys plc, which is a company registered in England and
Wales with its registered office at 3rd Floor, 40 Grosvenor Place, London, SW1X
7AW (Registered number 166023). For a list of European legal entities within
the Invensys Group, please go to http://www.invensys.com/en/legal/default.aspx.
You may contact Invensys plc on +44 (0)20 3155 1200 or e-mail
reception@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject
to the terms of any agreements between Invensys (and/or its subsidiaries and
affiliates) and the recipient (and/or its subsidiaries and affiliates).
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
