Alex,
Put a call in to TACH about OMMO, is it an option to turn on or something
that is installed? Just trying to help those on the other end figure out
what to do.
Thanks,
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Johnson, Alex
Sent: Tuesday, July 05, 2016 4:26 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Re: Do we need to convert all to g and then back to fdf?
Yes. That's the fastest way to eliminate the old Object Manager table from
the graphic can cause it to relearn the addresses of the names in the
displays.
Calling each display up a few times on each AW/WP would also do it, but
that's pretty slow.
BTW, you should implement Object Manager Multicast Optimization (OMMO) if
you are on 8.6 or later. This will - for the most part - eliminate
multicasts from the workstation after the top-level name (compound usually)
has been referenced once. That's a very good thing.
As I understand it, OMMO is not implemented by default.
Best,
Alex
_____________________________________________________________________________________
Alex Johnson | Schneider Electric | Invensys | United States | System
Architect, Next Generation Systems
Phone: +1 713 329 8472 | Fax: +1 713 329 1700
Email: alexander.johnson@xxxxxxxxxxxxxxxxxxxxxx | Site:
www.schneider-electric.com | Address: 10900 Equity Drive, 77041 Houston, TX,
United States
*** Please consider the environment before printing this e-mail
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which it
is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
