More importantly QF1252536 contains a fix for Servers with remoteFV sessions.
Wicked problem that took quite a while to identify and fix, much worse on
S2003 than S2008.
Seemed to me dependent on number of open sessions and time length opened.
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of
Brian Long [blong@xxxxxxx]
Sent: Wednesday, July 06, 2016 1:23 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Thanks!, betting QF takes care of. Just realized one station never got
QF1288645 and it seems ok..........
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Landry, Scott
Sent: Wednesday, July 06, 2016 1:12 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
H92/P92/H91/H90/H91/P90/P91 ; reboot required
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Brian Long [blong@xxxxxxx]
Sent: Wednesday, July 06, 2016 1:05 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Scott,
Install instructions say a re-boot is required. Does that mean server
reboot or FoxView only? If server, I won't be in a position to do today
but will try tomorrow.
Brian
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx]
On Behalf Of Landry, Scott
Sent: Wednesday, July 06, 2016 10:19 AM
To: foxboro@xxxxxxxxxxxxx
Cc: foxboro-bounce@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
If you can't install V10.4.4 easily (it requires removing FV QFs then
V10.x.x) then installing V10.4.4.
then I would highly recommend installing QF1252536 if you are using
V10.4.3
If you are pre-V10.4.3 than install V10.4.4
Regards,
Scott
________________________________________
From: foxboro-bounce@xxxxxxxxxxxxx [foxboro-bounce@xxxxxxxxxxxxx] On
Behalf Of Bill_Whitfield@xxxxxxxxxxxxx [Bill_Whitfield@xxxxxxxxxxxxx]
Sent: Wednesday, July 06, 2016 10:10 AM
To: foxboro@xxxxxxxxxxxxx
Cc: foxboro-bounce@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
To All,
I have been following the chatter, as we have experienced the same slow FV
performance.
We have over 26 Mesh Servers, various HW, SW, 2003, and 2008 versions.
We currently have the same versions as shown below, on Mesh Servers that
have the worst FV performance.
10.4.3, QF 1288645
9.1.576
Before going to the version shown above, we did not have slow issues.
We have also noticed our CPU % usage goes to 100 % and stays there for
about 15 seconds before falling.
During this time the HMI is not responsive.
Not saying this version has anything to do with CPU usage, just stating
what we are seeing.
After a server reboot, the FV performance is normal, the CPU % usage is
normal.
Over time, the CPU % usage increases and FV performance creeps back to
slow.
The HW platform for the version above is HP, rack mount servers.
I am currently reviewing all the nice comments about what to check for.
I will check with our Field Service to see about multicore and OMMO
implementation.
Thanks,
Bill Whitfield
(Embedded image moved to file: pic14228.jpg)
William R. Whitfield | Staff Process Control Eng |P: 864-879-5011 |C:
864-304-3148 |F: 864-879-5156 | bill_whitfield@xxxxxxxxxxxxx
2001 Hood Rd., P.O. Box 1400, Greer SC 29652 USA | www.m-petfilm.com
This e-mail may contain information that is confidential, privileged or
otherwise protected from disclosure.
If you are not an intended recipient of this email, please delete it and
any attachments and notify the sender that you have received it in error.
Any unauthorized use, dissemination, disclosure, copying or printing of
this e-mail or the information contained herein or attached hereto is
strictly prohibited.
(Embedded image moved to file: pic01745.jpg)
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which
it is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then
delete this message from your system. Please do not copy it or use it for
any purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or
attached files, is intended solely for the individual or entity to which
it is addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then
delete this message from your system. Please do not copy it or use it for
any purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally privileged.
If you have received it in error, you are on notice of its status. Please
notify the sender immediately by reply e-mail and then delete this message from
your system. Please do not copy it or use it for any purposes, or disclose its
contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
