Not specific to any graphic. Select screens have the same behavior.
Also, noticed that even when display pops up quick it may take 4 secs
to close before opening the next. Even if going to initial display.
Flicker issue was solved by changing to full redraw. (Thx Soni) Bad
thing is that we have hundreds of displays to fix.
Brian
Sent from my iPhone
On Jul 6, 2016, at 7:54 AM, Lagad, Deepak
<deepak.lagad@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Brian,
If this issue is specific to some graphics, can u check any object outside
boundary?
What version of IA used on system?
Is multicore enabled?
_____________________________________________________________________________________
Deepak Lagad
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Neufeld, Brahm
Sent: Wednesday, July 06, 2016 4:46 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
I want to second this possibility; old references in the host file.
We have someone on site doing a service PM, on one of our operators were
complaining their WP was very slow (paradoxically, sometimes it was OK).
After some digging, we found several errors in the hosts file - an FCP270 had
the IP address of a WP, and a WP had the IP of an FCP270, etc. Not sure how
this happens.
We will try and clean this up today and hopefully it resolves our issue.
-Brahm
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Bakker, René
Sent: Wednesday, July 06, 2016 6:02 AM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
All,
However unlikely this may seem, I have had good results with cleaning up the
"hosts" file.
Any "hosts" file in the complete system, NOT reflecting the actual situation,
will result in unpredictable delays in display call-up.
Curious to hear if this applies in this case.
Regards,
René Bakker - Schneider-Electric EMEATAC - Baarn - the Netherlands.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Dirk Pauwels
Sent: 06 July, 2016 11:14
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Maybe you can try to RDP to this station or use tight vnc or something
similar to find out if it's related to the video cards...
Since it occurs on all stations maybe it's related to a setting on the video
cards?
I suppose when you open a certain display multiple times and the problem
stays it's not related to optimization.
Rgds,
Dirk
-----Oorspronkelijk bericht-----
Van: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] ;
Namens Brian Long
Verzonden: dinsdag 5 juli 2016 23:47
Aan: foxboro@xxxxxxxxxxxxx
Onderwerp: Re: [foxboro] FV Display Call Up Time HP Gen9
Truthfully don't think this is the issue because we've called displays
multiple times, sometimes ok, sometimes not. Also occurs when brining up
select screens.
Also have the flicker issue on busy displays which we thought was a long
solved problem.
Brian
Sent from my iPhone
On Jul 5, 2016, at 4:24 PM, Boulay, Russ
<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
If displays were just moved, they hold the optimization of the former
workstation info.
So it may take 3 callups to clear.
First callup needs to flush previous optimizations and relearn
differences Second callup should optimize fully learned paths
Subsequent callups good If convert fdf to g ....then copy and convert
g to fdf....all optimization is cleared and displays should optimize in 2
callups.
Find all connections the first callup...
then good all subsequent callups.
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Long
Sent: Tuesday, July 05, 2016 2:17 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Displays were just moved not converted. Do we need to covert all to g and
then back to fdf?
Thanks,
Brian
Sent from my iPhone
On Jul 5, 2016, at 3:40 PM, Boulay, Russ
<Russ.Boulay@xxxxxxxxxxxxxxxxxxxxxx> wrote:
How were the displays moved to the new workstation?
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Bergeron, Normand
Sent: Tuesday, July 05, 2016 1:37 PM
To: foxboro@xxxxxxxxxxxxx
Subject: Re: [foxboro] FV Display Call Up Time HP Gen9
Hi Brian,
Check your /usr/fox/customer/hi/dmcfg file. Are your DM's configured as
operator or view only? If configured as view only, Foxview might be slow
even if the environment is set to Eng_env....
Norm
_____________________________________________________________________
_
_______________
Normand Bergeron | Schneider Electric | North America Operations |
Canada | Spécialiste d'application / Application specialist
Phone: +1 514 421 4210 | Fax: +1 514 421 8054 | Mobile: +1 514 220
5081
Email: normand.bergeron@xxxxxxxxxxxxxxxxxxxxxx | Site:
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.schneider-2De
lectric.com&d=DQIDaQ&c=zgHsTqBQkGAdNuoPRxUzSQ&r=R9UMiMkeSjiV9FWb7VxRX
G0W2FAJHYNFjNjWClnSMuk&m=M53KXOJ2XIGhKU-KZDXNaI7ZCkXQy5syREd3cL80yf8&
s=sGIPPtZBU_6qq4dm3xrzVzdoRVBWgb0J_1M5B9G0hy4&e= | Address: 4, rue
Lake, H9B 3H9 Dollard-des-Ormeaux, Quebec, Canada
*** Please consider the environment before printing this e-mail
-----Original Message-----
From: foxboro-bounce@xxxxxxxxxxxxx
[mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Long
Sent: Tuesday, July 5, 2016 4:32 PM
To: foxboro@xxxxxxxxxxxxx
Subject: [foxboro] FV Display Call Up Time HP Gen9
We’ve just completed upgrading from Dell Server 2003 to HP Gen9 Server
2008. FV is very slow in calling up displays, sometimes it’s fine, have
not taken the time to put a call in yet but will. Anyone have any helpful
suggestions? We had no issues with DellR710 with Win2003. We have 11
servers, all 11 have this issue.
Thanks in advance,
Brian Long
Arkansas Kraft
.
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.thecassandraproject.org_disclaimer.html&d=DQIDaQ&c=zgHsTqBQkGAdNuoPRxUzSQ&r=R9UMiMkeSjiV9FWb7VxRXG0W2FAJHYNFjNjWClnSMuk&m=M53KXOJ2XIGhKU-KZDXNaI7ZCkXQy5syREd3cL80yf8&s=FLzJtIs5mP9_HMKvDSwYGslI_FD_Y6U1fsDg9FSAzCI&e=
foxboro mailing list:
https://urldefense.proofpoint.com/v2/url?u=http-3A__www.freelists.org_list_foxboro&d=DQIDaQ&c=zgHsTqBQkGAdNuoPRxUzSQ&r=R9UMiMkeSjiV9FWb7VxRXG0W2FAJHYNFjNjWClnSMuk&m=M53KXOJ2XIGhKU-KZDXNaI7ZCkXQy5syREd3cL80yf8&s=jXoZ6wdGT4ayidt-jwkJkLJknx_aVdppIXds9cc6ZzA&e=
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
________________________________
For more information on Agrium’s E-Mail Policy or to unsubscribe, click here:
http://www.agrium.com/email_footer_en.jsp
Pour plus de renseignements sur la politique de courrier électronique
d’Agrium ou pour vous désabonnez, cliquez ici :
http://www.agrium.com/email_footer_fr.jsp
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
*** Confidentiality Notice: This e-mail, including any associated or attached
files, is intended solely for the individual or entity to which it is
addressed. This e-mail is confidential and may well also be legally
privileged. If you have received it in error, you are on notice of its
status. Please notify the sender immediately by reply e-mail and then delete
this message from your system. Please do not copy it or use it for any
purposes, or disclose its contents to any other person.
_________________________________________________________________________
This mailing list is neither sponsored nor endorsed by Schneider Electric
(formerly The Foxboro Company). Use the info you obtain here at your own
risks. See the disclaimer at www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
