I assume that this is a team test. :) Question 4 - How stupid is the way a PDA is required to set letterbugs on FCP270s? What benefit does this provide a plant employee? Very stupid, in my not-so-humble opinion. The intended benefit was that one would not have to build letterbugs by hand. That's a good thing. The unexpected consequence is that IR in handhelds is going the way of the dodo (not immediately, but not too far down the line) which will eventually leave all of us without a way to set the letterbug of a controller. That's a bad thing. We are looking at using a letterbug mapper like the one used for Micro I/A to replace the handheld. Question 1 - Don't delete it. Simply set it up to change to the environment that you want when the Initial environment is invoked. This gets you everything you want - except eliminating it from the list - and keeps you from breaking anything. I'll leave the rest to people living in a time zone where it is not 38 minutes after mid-night. Regards, Alex Johnson Invensys Systems, Inc. 10900 Equity Drive Houston, TX 77041 713.329.8472 (voice) 713.329.1700 (fax) 713.329.1600 (switchboard) alex.johnson@xxxxxxxxxxxxxxxx -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of David Johnson Sent: Thursday, May 17, 2007 12:20 AM To: Foxboro@xxxxxxxxxxxxx Subject: [foxboro] A host of questions for the professors When the student is ready, the teacher will appear. -Saying to = promote the understanding of Zen (or Timon to Pumba in the Lion King 1.5) I'm here? This doesn't look right. -me to a garmin gps OK Professors, the student has arrived. Or is it the other way around? Question 1) 5 pts discussion Can you safely (what consequences are there if any) delete the = Initial environment? Question 2) 15 pts show all work What are the correct steps to remove buttons from the alarm manager = displays so that they are gone when the alarm manager restarts. Is manual B0700AM correct, if so why? Question 3) 10 pts After setting the SIMOPT=3D1 and SIMCIN =3D 0XFFFF why does the PLB = ladder show simulate, but non of the CINs are shown high? Question 4) 10 pts discussion How stupid is the way a PDA is required to set letterbugs on = FCP270s? What benefit does this provide a plant employee? You have exactly 1 hour. You may begin now. David = = _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html = foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Djoin to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=3Dleave = Confidentiality Notice: The information contained in this electronic message and any attachment(s) = to this message are intended for the exclusive use of the recipient(s) and = may contain confidential, privileged or proprietary information. If you are= not the intended recipient, please notify the sender immediately, delete a= ll copies of this message and any attachment(s). Any other use of the E-Mai= l by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave