[elky] Re: Valve Cover Gaskets
- From: Chris Lindh <chrislindh@xxxxxxxxx>
- To: elky@xxxxxxxxxxxxx
- Date: Mon, 29 Mar 2010 22:21:00 -0400
I'd like to hear your feedback... leaks drive me crazy. My 406 leaks at the
rear, possibly from both the pan and the rear main seal. It is
aggravating. When the Chevelle leaves for paint the 406 will be pulled soon
after.
On Mon, Mar 29, 2010 at 10:14 PM, Dann Keller <kwhale22@xxxxxxxxxxx> wrote:
> Thanks all for your inputs. Somewhat like the El Camino Central site
> there were a range of recommendations. I settled on a set of Edelbrock
> gaskets with a rubber outside and composite core. Probably more than I
> need but I hope to not have to replace them again. We'll see.
>
> Dan
>
> ------------------------------
> Date: Mon, 29 Mar 2010 12:52:37 -0400
> Subject: [elky] Re: Valve Cover Gaskets
> From: elcam84@xxxxxxxxx
> To: elky@xxxxxxxxxxxxx
>
>
>
> The only ones I like are the rubber ones with the steel insert.
> Felpro has some good rubber ones.
>
> If using cork get good thick ones and RTV the crap out of it. If
> you ever rebuild the old style before 86 type then have the machine shop fly
> cut the flange so you have a flat even surface to seal to.
>
>
> Robert Adams
>
>
>
> ------------------------------
> Hotmail: Trusted email with Microsoft’s powerful SPAM protection. Sign up
> now. <http://clk.atdmt.com/GBL/go/210850552/direct/01/>
>
Other related posts:
