[ddots-l] Re: Recording with the monitors turned off.

Hmmm. Maybe it is our setup that is different, because I could do that now
without affecting recording. I run from my aux out 1 and 2 of my 01v to
delta 66 inputs 1 and 2 and I never put my playback track into the bus, so
when I do vocals, I can turn the playback track down and it never affects
anything. And jaws never goes through my mixer anyway. But, hey, to each
their own. 

-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Phil Muir
Sent: Friday, May 27, 2005 1:53 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Recording with the monitors turned off.

So that I can give clients who come into the studio a separate mix.  That
way, I can tailor the mix to the client.  So for example, if the client
wants more of there vocal or, less of the backing track then, I can do that.
This also provides clients with a Jaws free mix in there headphones which, I
am sure they appreciate.

Regards, Phil Muir

P J Muir Productions
URL: www.philmuir.com/
----- Original Message -----
From: "Damon Fibraio" <dfibraio@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, May 27, 2005 5:53 PM
Subject: [ddots-l] Re: Recording with the monitors turned off.


>I am using a presonus hp4 headphone preamp which I run out of the headphone
> jack on my mixer. You don't need to match brands. The HP4 costs about $100
> or so and it is a really great piece. Phil. You mentioned running the
> headphone amp out of one of the aux buses on the mixer. Why would you do
> this as opposed to running out of the headphone jack? Just curious.
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
> Behalf Of Jim Jackson
> Sent: Friday, May 27, 2005 12:37 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Recording with the monitors turned off.
>
> Phil, would the amp have to something from mackie, since my mixer is and
if
> not, what's a very reasonably priced amp?  Thanks
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On Behalf Of Phil Muir
> Sent: Friday, May 27, 2005 12:46 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Recording with the monitors turned off.
>
> Hi Jim!!
>
> You could purchase a headphone amp.  You could then plug all of your
> headphones into that.  You would then plug the headphone amp into one of
the
> Aux's on your Mackie
> 1202 mixer.  I have a very
> reasonably priced Berenger headphone amp here.  I can plug in 4 headsets.
> You can get ones with more headset sockets than that.  I have scene ones
> with 8 inputs.
>
> Regards, Phil Muir
>
> P J Muir Productions
> URL:
> www.philmuir.com/
> ----- Original Message -----
> From: "Jim Jackson" <cs2005@xxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Friday, May 27, 2005 5:21 PM
> Subject: [ddots-l] Recording with the monitors turned off.
>
>
>> Hello all, I'm planning a project which consists of more than one
> backup
>> vocals, I want to record them all at once without using my audio
>> monitors because of all the things that would feed in to the mics via
>> the monitors.  I assume that there would be something that I could buy
>> that would plug in to my phone jack on my Mackie 12.02 mixer that
> would
>> enable me to plug in multiple pairs of headsets.  Can some one confirm
>> this for me or suggest some other way of getting things done?  Thanks
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to
>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>>
>>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
> 
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to 
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: