Partly, since I primarily use NVDA to either test certain things, or use it to specifically read afrikaans etc., with the eSpeak voices, but otherwise, I am running a relatively recent version of NVDA, so don't think that one would, off-hand work with jaws 13's eloquence synthesizer, but, main thing now is that while newish NVDA, I stick to only portable implementations thereof, so, simple, quick and easy since it's really only my secondary screen reader - but, yes, have all the respect in the world for it...<smile> Stay well Jacob Kruger Blind Biker Skype: BlindZA '...fate had broken his body, but not his spirit...' ----- Original Message ----- From: Boshoff, Deon (GP Health) To: blindza@xxxxxxxxxxxxx Sent: Thursday, February 16, 2012 5:47 AM Subject: [blindza] Re: Dumb question relating to recorded audio tutorials/walkthroughs TTS speed UID09duf63i2bd So, here's another dum question for you; why don't you use Eloquence with NVDA? And yes, 40 with NVDA is fine, while 40 percent with Jaws is also fine with most people. I have done this before, and at even higher speeds, everybody liked it. Deon [G. Boshoff, BA[Stell]UDC[Potch] WESKOPPIES HOSPITAL Tel: 0123199735 Mobile: 0829699571 Fax: 0123277076 Bleeper: 0123199820, code 0002 E-mail: Deon.boshoff@xxxxxxxxxxxxxx <mailto:Deon.boshoff@xxxxxxxxxxxxxx> WEB; www.inclusiveplanet.com -----Original Message----- From: blindza-bounce@xxxxxxxxxxxxx [mailto:blindza-bounce@xxxxxxxxxxxxx]On Behalf Of Dewald van Deventer Sent: 15 February 2012 04:45 PM To: blindza@xxxxxxxxxxxxx Subject: [blindza] Re: Dumb question relating to recorded audio tutorials/walkthroughs TTS speed Hi Jacob. I think between Voice rate of about 68 "25 percent" and about 73 "30 percent". would be the best. ----- Original Message ----- From: Jacob Kruger To: NAPSA Blind ; BlindZA Sent: Wednesday, February 15, 2012 3:51 PM Subject: [blindza] Dumb question relating to recorded audio tutorials/walkthroughs TTS speed Just wondering, if I record some or other audio tutorial/walkthrough, including my screen reader's output, what would a good/suitable/average TTS voice speed be - for example, I myself keep jaws set to it's speed of roundabout 105, and NVDA to like 40, since it's my sort of secondary screen reader, and I'm not as used to hearing the eSpeak synthesizer. On the other hand, I myself get told I talk too fast when it comes to explaining technical information, etc. to various people, but anyway... What it comes down to is just wondering, for something like/similar to a tutorial/demonstrative podcast, etc., what type of speed do you guys reckon it would be best to stick to, and I suppose, the speed actually comes down to something like words per minute/second - and just tested it and seems like NVDA is running roundabout 8 words per second at the moment, but anyway... Thoughts? This is all partly related to why I have been looking into sorting out recording PC output, and then mixing it with spoken audio as well, but will leave it at that for now...<smile> Stay well Jacob Kruger Blind Biker Skype: BlindZA '...fate had broken his body, but not his spirit...' -------------------------------------------------------------------------- avast! Antivirus: Outbound message clean. Virus Database (VPS): 120214-0, 2012/02/14 Tested on: 2012/02/15 04:45:08 PM avast! - copyright (c) 1988-2012 AVAST Software.