Hi Devadas! On Thu, Jan 29, 2009 at 05:50, Devadas Varma wrote: > Then I used Chroma based ink limiting (c in Lch or a combination of a and b > in L*a*b), and this worked much better. To my surprise, the ink limits were > lower than I was used to in Density based setup. But this was still high ink > limits. I kept the ink limits fairly high (but lower than density based, > especially Cyan did reverse chroma). The way I see it, the problem with using solely chroma is that the chroma value may continue to increase even after an unacceptable hue shift. Therefore, as you wrote, using a/b or a combination is good advice. Martin Weberg