[amayausers.com] Re: newbie, continued

  • From: "K Nehmer" <nehmer@xxxxxxxxxxxxxx>
  • To: <amayausers@xxxxxxxxxxxxx>
  • Date: Fri, 26 Feb 2010 15:00:32 -0600

Well, they called me back with a code--it wasn't the one in the dongle but I 
got it loaded. Now I'm off to try Mary's idea about changing the NIC 
settings---CROSS YOUR FINGERS!

kATHY
  ----- Original Message ----- 
  From: Roland R. Irish III 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Friday, February 26, 2010 2:22 PM
  Subject: [amayausers.com] Re: newbie, continued


  You can get a crossover cable at ANY computer store, even Staples,
  probably Walmart...it is a STANDARD piece of cable. Melco will charge you
  4 times the price of Staples...
  so don't get screwed ordering it...just run to the nearest computer geek place
  (Best Buy, etc.) and pick one up. You only need it long enough to go from the
  computer to the Amaya plus a couple of feet. And it doesn't matter if it's up 
in the
  air or on the floor...LOL...the current flows anyways!
  Code for Designshop is IN the dongle-you did get a dongle, didn't you? 
Actually,
  should be TWO of them and they have to be put on the computer in the correct 
order...
  which I can't tell you...I don't know...but one is for Design Shop the other 
is for
  Amaya OS. A tech can tell you from the serial number on the dongle which is 
which.
  Good luck!
  Now you know why I recommend calling in your local service rep...worth it!


  Roland R. Irish III

  www.sunrisegraphics.org
  signman@xxxxxxxxxxxxxxxxxxx


  Sunrise Graphics
  116 Main St
  Claremont, NH 03743
  603-543-1324 
  Check out our 'instant' catalogs
  http://www.companycasuals.com/sunrisegraphics/start.jsp   clothing and 
accessories for embroidery & screenprinting
  http://www.plasticpromotions.com/?ID=SS850825D
  http://www.healthypromotions.com/?ID=SS850825D
  http://www.thewritepromotion.com/?ID=SS850825D



  On Feb 26, 2010, at 3:00 PM, K Nehmer wrote:


    Well, my software is here.  Successfully loade dthe OS but the Design Shop 
Pro + wants my code--and, of course, it's no where to be found.............

    Was told when I ordered the software that it probably was a software error 
when I can't get the computer to recognize the crossover cable--WRONG.  Still 
get the message that the Amaya OS is not recognizing the ethernet connection.  
Is the only place to get a crossover cable Melco?

    Kathy

Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 02-2010