Thanks Kevin. I tried 40 and 30. It did help, but I still have a few bobbin threads showing. I'll keep playing. Frank ----- Original Message ----- From: "Kevin A. Wasik" <kwasik@xxxxxxxxx> To: <amayausers@xxxxxxxxxxxxxxxx> Sent: Wednesday, April 14, 2004 11:07 PM Subject: Re: [amayausers] micro times > 40 works good. Don't forget to reset it back to 50 after you are done. > Kevin Wasik. > Melco Field Tech. > > > frank davis wrote: > > >No, that's one I haven't tried. Actually I forgot about it. I'll give it a > >shot. Thanks Janel. > >Frank > >----- Original Message ----- > >From: "Janel Harris" <janel@xxxxxxxxxxxxxx> > >To: <amayausers@xxxxxxxxxxxxxxxx> > >Sent: Wednesday, April 14, 2004 9:22 PM > >Subject: RE: [amayausers] micro times > > > > > > > > > >>Frank, > >> > >>Have you tried lowering the column feed? > >> > >>Janel Harris > >>Dimensional Designs > >>http://www.dimdesigns.com > >>Contract Digitizer > >>Melco On-Site Trainer > >> > >> > >>-----Original Message----- > >>From: frank davis [mailto:fadavis@xxxxxxxxxxxx] > >>Sent: Wednesday, April 14, 2004 5:45 PM > >>To: Amayausers@xxxxxxxxxxxxxxxx > >>Subject: [amayausers] micro times > >> > >>Does anyone but me have trouble with micro times. > >>I'm using a 70/10 sharp needle on poplin. The lettering is .26'' and > >>set to specs. Lettering looks good except for the white bobbin thread > >>that gets pulled up through several times per letter. I've tried > >>everything I can think of; material thickness, bobbin tension speed, > >>pull comp, ect. Does anyone else have this problem? Just wondered if > >>someone can suggest something I'm missing. The bobbin thread in red > >>lettering doesn't look that great. > >>Thanks, > >>Frank > >>Force Ten > >> > >> > >>--------------------------------------------------------------------- > >>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > >>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > >> > >> > >> > >> > > > > > > > >--------------------------------------------------------------------- > >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > > > > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx > > --------------------------------------------------------------------- To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx