[amayausers] Re: micro times

40 works good. Don't forget to reset it back to 50 after you are done.
Kevin Wasik.
Melco Field Tech.


frank davis wrote:

>No, that's one I haven't tried.  Actually I forgot about it.  I'll give it a
>shot. Thanks Janel.
>Frank
>----- Original Message ----- 
>From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxxxxx>
>Sent: Wednesday, April 14, 2004 9:22 PM
>Subject: RE: [amayausers] micro times
>
>
>  
>
>>Frank,
>>
>>Have you tried lowering the column feed?
>>
>>Janel Harris
>>Dimensional Designs
>>http://www.dimdesigns.com
>>Contract Digitizer
>>Melco On-Site Trainer
>>
>>
>>-----Original Message-----
>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx]
>>Sent: Wednesday, April 14, 2004 5:45 PM
>>To: Amayausers@xxxxxxxxxxxxxxxx
>>Subject: [amayausers] micro times
>>
>>Does anyone but me have trouble with micro times.
>>I'm using a 70/10 sharp needle on poplin.  The lettering is .26'' and
>>set to specs.  Lettering looks good except for the white bobbin thread
>>that gets pulled up through several times per letter.  I've tried
>>everything I can think of; material thickness, bobbin tension speed,
>>pull comp, ect.  Does anyone else have this problem?   Just wondered if
>>someone can suggest something I'm missing.  The bobbin thread in red
>>lettering doesn't look that great.
>>Thanks,
>>Frank
>>Force Ten
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>>
>>
>>    
>>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>
>  
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: