[amayausers] Re: micro times

Hey Frank
Note: you can tighten the bobbin little more it should be fine for
the runs you are doing. Then you can reset the bobbin back to Amaya specs.
Kevin Wasik.
Melco Field Tech.


frank davis wrote:

>Thanks Kevin.  I tried 40 and 30.  It did help, but I still have a few
>bobbin threads showing.  I'll keep playing.
>Frank
>----- Original Message ----- 
>From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxxxxx>
>Sent: Wednesday, April 14, 2004 11:07 PM
>Subject: Re: [amayausers] micro times
>
>
>  
>
>>40 works good. Don't forget to reset it back to 50 after you are done.
>>Kevin Wasik.
>>Melco Field Tech.
>>
>>
>>frank davis wrote:
>>
>>    
>>
>>>No, that's one I haven't tried.  Actually I forgot about it.  I'll give
>>>      
>>>
>it a
>  
>
>>>shot. Thanks Janel.
>>>Frank
>>>----- Original Message ----- 
>>>From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
>>>To: <amayausers@xxxxxxxxxxxxxxxx>
>>>Sent: Wednesday, April 14, 2004 9:22 PM
>>>Subject: RE: [amayausers] micro times
>>>
>>>
>>>
>>>
>>>      
>>>
>>>>Frank,
>>>>
>>>>Have you tried lowering the column feed?
>>>>
>>>>Janel Harris
>>>>Dimensional Designs
>>>>http://www.dimdesigns.com
>>>>Contract Digitizer
>>>>Melco On-Site Trainer
>>>>
>>>>
>>>>-----Original Message-----
>>>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx]
>>>>Sent: Wednesday, April 14, 2004 5:45 PM
>>>>To: Amayausers@xxxxxxxxxxxxxxxx
>>>>Subject: [amayausers] micro times
>>>>
>>>>Does anyone but me have trouble with micro times.
>>>>I'm using a 70/10 sharp needle on poplin.  The lettering is .26'' and
>>>>set to specs.  Lettering looks good except for the white bobbin thread
>>>>that gets pulled up through several times per letter.  I've tried
>>>>everything I can think of; material thickness, bobbin tension speed,
>>>>pull comp, ect.  Does anyone else have this problem?   Just wondered if
>>>>someone can suggest something I'm missing.  The bobbin thread in red
>>>>lettering doesn't look that great.
>>>>Thanks,
>>>>Frank
>>>>Force Ten
>>>>
>>>>
>>>>---------------------------------------------------------------------
>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>>>>
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>
>>>---------------------------------------------------------------------
>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>>>
>>>
>>>
>>>
>>>      
>>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>>
>>
>>    
>>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>
>  
>

Other related posts: