[amayausers] Re: micro times

No, that's one I haven't tried.  Actually I forgot about it.  I'll give it a
shot. Thanks Janel.
Frank
----- Original Message ----- 
From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Wednesday, April 14, 2004 9:22 PM
Subject: RE: [amayausers] micro times


> Frank,
>
> Have you tried lowering the column feed?
>
> Janel Harris
> Dimensional Designs
> http://www.dimdesigns.com
> Contract Digitizer
> Melco On-Site Trainer
>
>
> -----Original Message-----
> From: frank davis [mailto:fadavis@xxxxxxxxxxxx]
> Sent: Wednesday, April 14, 2004 5:45 PM
> To: Amayausers@xxxxxxxxxxxxxxxx
> Subject: [amayausers] micro times
>
> Does anyone but me have trouble with micro times.
> I'm using a 70/10 sharp needle on poplin.  The lettering is .26'' and
> set to specs.  Lettering looks good except for the white bobbin thread
> that gets pulled up through several times per letter.  I've tried
> everything I can think of; material thickness, bobbin tension speed,
> pull comp, ect.  Does anyone else have this problem?   Just wondered if
> someone can suggest something I'm missing.  The bobbin thread in red
> lettering doesn't look that great.
> Thanks,
> Frank
> Force Ten
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: