[amayausers] Re: micro times

I Thought that was you!
We moved to a new place since the last visit when
you got us all set up and running well
I still have trouble with one machine and tracking errors and
just general design loading errors especially since we loaded in Amaya
flex and now it really fluctuates,
I guess I'll have to call and get you guys in here soon!

Thanks for the info on the bobbin tension,
My biggest question was do the amayas like things tighter or
looser than the standard 2" to 4" drop test.
Thanks Kevin!

Ron Vinyard
Owner / Graphic Designer
Body Cover / Magic Stitches
420  S.W. "H" Street
Grants Pass, OR 97526-2532

1-888-435-0176
1-541-471-1504
Fax 541-471-0427
www.bodycoverdesign.com


----- Original Message ----- 
From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Thursday, April 15, 2004 7:07 PM
Subject: Re: [amayausers] micro times


> Hey Ron,
>
> I know you. I've been to your shop I think?
> As far as today yes on the 2 to 4 drop or
> yo yo but, a little looser. Things do change
> from time to time Jeff Banks
> can correct me if I'm wrong here.
> I have heard of what you are talking about.
> I just tell my customers to tighten the bobbin a little
> more. So the bobbin screw does not back off when
> sewing. I guess this has been working for my customers they have not
> said anything more to me. On the magnetic bobbins
> I have not tried them yet. I did run into the rep guy at the Long Beach
> show. Mike Doe Mgr of Melco Mart told me that he gave some to engineering
> to test. I do not know the results of their testing. Maybe there is
someone
> on the list that has tried them.
> Thanks
> Kevin Wasik.
> Melco Field Tech.
>
>
>
> Body Cover Staff wrote:
>
> >Kevin,
> >Is Amaya specs calling for the 2" to 4" drop for
> >bobbin tension still I remember it was stated one
> >way then changed early on when they first came out.
> >What do you suggest/ cause mine changes constantly especially
> >after 3/4 of the bobbin is gone.
> >Has anyone tried the magnetic bobbins? they are supposed to maintain
> >consistent tension through the whole bobbin.
> >Just wondering.
> >Thanks in advance!
> >Ron Vinyard
> >Owner / Graphic Designer
> >Body Cover / Magic Stitches
> >420  S.W. "H" Street
> >Grants Pass, OR 97526-2532
> >
> >1-888-435-0176
> >1-541-471-1504
> >Fax 541-471-0427
> >www.bodycoverdesign.com
> >
> >
> >----- Original Message ----- 
> >From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
> >To: <amayausers@xxxxxxxxxxxxxxxx>
> >Sent: Thursday, April 15, 2004 6:13 PM
> >Subject: Re: [amayausers] micro times
> >
> >
> >
> >
> >>Hey Frank
> >>
> >>Note: you can tighten the bobbin little more it should be fine for
> >>the runs you are doing. Then you can reset the bobbin back to Amaya
specs.
> >>Kevin Wasik.
> >>Melco Field Tech.
> >>
> >>
> >>frank davis wrote:
> >>
> >>
> >>
> >>>Thanks Kevin.  I tried 40 and 30.  It did help, but I still have a few
> >>>bobbin threads showing.  I'll keep playing.
> >>>Frank
> >>>----- Original Message ----- 
> >>>From: "Kevin A. Wasik" <kwasik@xxxxxxxxx>
> >>>To: <amayausers@xxxxxxxxxxxxxxxx>
> >>>Sent: Wednesday, April 14, 2004 11:07 PM
> >>>Subject: Re: [amayausers] micro times
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>>40 works good. Don't forget to reset it back to 50 after you are done.
> >>>>Kevin Wasik.
> >>>>Melco Field Tech.
> >>>>
> >>>>
> >>>>frank davis wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>No, that's one I haven't tried.  Actually I forgot about it.  I'll
give
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>it a
> >>>
> >>>
> >>>
> >>>
> >>>>>shot. Thanks Janel.
> >>>>>Frank
> >>>>>----- Original Message ----- 
> >>>>>From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
> >>>>>To: <amayausers@xxxxxxxxxxxxxxxx>
> >>>>>Sent: Wednesday, April 14, 2004 9:22 PM
> >>>>>Subject: RE: [amayausers] micro times
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>Frank,
> >>>>>>
> >>>>>>Have you tried lowering the column feed?
> >>>>>>
> >>>>>>Janel Harris
> >>>>>>Dimensional Designs
> >>>>>>http://www.dimdesigns.com
> >>>>>>Contract Digitizer
> >>>>>>Melco On-Site Trainer
> >>>>>>
> >>>>>>
> >>>>>>-----Original Message-----
> >>>>>>From: frank davis [mailto:fadavis@xxxxxxxxxxxx]
> >>>>>>Sent: Wednesday, April 14, 2004 5:45 PM
> >>>>>>To: Amayausers@xxxxxxxxxxxxxxxx
> >>>>>>Subject: [amayausers] micro times
> >>>>>>
> >>>>>>Does anyone but me have trouble with micro times.
> >>>>>>I'm using a 70/10 sharp needle on poplin.  The lettering is .26''
and
> >>>>>>set to specs.  Lettering looks good except for the white bobbin
thread
> >>>>>>that gets pulled up through several times per letter.  I've tried
> >>>>>>everything I can think of; material thickness, bobbin tension speed,
> >>>>>>pull comp, ect.  Does anyone else have this problem?   Just wondered
> >>>>>>
> >>>>>>
> >if
> >
> >
> >>>>>>someone can suggest something I'm missing.  The bobbin thread in red
> >>>>>>lettering doesn't look that great.
> >>>>>>Thanks,
> >>>>>>Frank
> >>>>>>Force Ten
> >>>>>>
> >>>>>>
>
>>>>>>---------------------------------------------------------------------
> >>>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> >>>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>---------------------------------------------------------------------
> >>>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> >>>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>---------------------------------------------------------------------
> >>>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> >>>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>
> >>>---------------------------------------------------------------------
> >>>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> >>>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >
> >
> >
> >---------------------------------------------------------------------
> >To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> >For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
> >
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: