This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/460.html#000007 Susan, when was it you got the All in One? Mine is only a year + old, and they have dropped the magnets and gone to clips-work great! The bottom hoop is held in place top and bottom by a 'cradle' system and I've never had it move. I was afraid I'd snap the whole thing in half when I used it-I tend to go overboard pushing things together and I always use my hoops real tight. Clamped it onto a rolling cabinet for a worksurface, and I can push the cabinet all around but the All In One takes my monster hand pressure with no problem. The 'wings' and sleeve attachements built in are great-I have only used the oversize wings a couple times and have never done sleeves so I can't say anything about those. But it has saved us a ton of time and waste. I get it all set up for spacing, etc. and then my wife takes over for production runs. She used to have to wait for me to manually hoop everything on a counter or using my screenprinter pallets...now she can just work without me. Roland =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================