[amayausers] Re: Hats - Caps - WACF etc....
- From: "Russell" <russell@xxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sat, 26 Mar 2005 15:58:52 -0500
Can I use the CCF on the same cap driver as the WACF?
Russell Silva
R. S. Embroidery
508-222-4433
----- Original Message -----
From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Saturday, March 26, 2005 2:58 PM
Subject: [amayausers] Re: Hats - Caps - WACF etc....
>
> Caps in general are more difficult because you're working with a curved
> surface. All of the suggestions about good digitizing, design size,
> hooping etc are more important than brand of machine. I also agree with
> Rod about the Conventional Cap Frame. They are easier to operate and it
> frames the cap tighter across the needleplate. I personally would shelf
> the WACF for wide designs only and run CCF for everyday use.
>
> Janel Harris
> Dimensional Designs
> http://www.dimdesigns.com
>
>
>
>
>
>
>
Other related posts:
