[amayausers] Re: Hats - Caps - WACF etc....

Russell,
 Yup, ya can........no problem.

Rod Springer

----- Original Message ----- 
From: "Russell" <russell@xxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Saturday, March 26, 2005 1:58 PM
Subject: [amayausers] Re: Hats - Caps - WACF etc....


> Can I use the CCF on the same cap driver as the WACF?
> 
> Russell Silva
> R. S. Embroidery
> 508-222-4433
> 
> ----- Original Message ----- 
> From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Saturday, March 26, 2005 2:58 PM
> Subject: [amayausers] Re: Hats - Caps - WACF etc....
> 
> 
>> 
>> Caps in general are more difficult because you're working with a curved
>> surface. All of the suggestions about good digitizing, design size,
>> hooping etc are more important than brand of machine. I also agree with
>> Rod about the Conventional Cap Frame. They are easier to operate and it
>> frames the cap tighter across the needleplate. I personally would shelf
>> the WACF for wide designs only and run CCF for everyday use.
>> 
>> Janel Harris
>> Dimensional Designs
>> http://www.dimdesigns.com
>>  
>>  
>> 
>> 
>> 
>> 
>> 
> 
>

Other related posts: