Hi, Specifically, I am wondering what this message means: This test requires that all endpoints on the device is plugged in before being run. There are 3 unplugged endpoints... please plug them in and re-run the test Thank you -----Original Message----- From: wdmaudiodev-bounce@xxxxxxxxxxxxx [mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of Sam Tertzakian Sent: Tuesday, January 08, 2008 5:34 PM To: wdmaudiodev@xxxxxxxxxxxxx Subject: [wdmaudiodev] DTM problem Hi, When I try to run DTM (Driver Test Manager) test on my Audio Driver I get the following message: Start Case: ID 16.26:2.1 : Standard Streaming\Capturing Pin Tests\Setting Position to Invalid Position (outside the buffer):[Tue Jan 08 17:28:23 2008] Device Name = Pin # 0 on 1-Antex USB FTR/1 Wave [Capture Pin] PnP ID = {A1280C41-E8FB-4a73-8C2F-4C306157B3DB}\VID_1239&PID_0002 This test requires that all endpoints on the device is plugged in before being run. There are 3 unplugged endpoints... please plug them in and re-run the test End Case: ID 16.26:2.1 : FAIL : Standard Streaming\Capturing Pin Tests\Setting Position to Invalid Position (outside the buffer) : [Tue Jan 08 17:28: I have a USB device that is capture only. (It does not use USBAUDIO.) ****************** WDMAUDIODEV addresses: Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx URL to WDMAUDIODEV page: http://www.wdmaudiodev.com/ ****************** WDMAUDIODEV addresses: Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx URL to WDMAUDIODEV page: http://www.wdmaudiodev.com/
