[torontocbm] Re: Toronto PET Users Group - October 18th, 2018

  • From: Stewart Russell <scruss@xxxxxxxxx>
  • To: TorontoCBM Freelist <torontocbm@xxxxxxxxxxxxx>
  • Date: Wed, 17 Oct 2018 18:43:02 -0400

Anything would do. Unless you're going to use it for something later, it's
overkill. The C64 Mini can only do USB 2 speeds.

I'm sure I have a bunch of cheap old flash sticks: I will try to remember
to bring 'em.

Seems my plan to see if C64 Mini distros would work on a Pocket CHIP are
thwarted by an older processor and weird proprietary boot code. Dammit!
Wish I had a use for that paperweight!

 Stewart

On Wed, Oct 17, 2018, 18:14 Nostalgic for the 70's & 80's, <
superbrother1968@xxxxxxxxx> wrote:

Hi, does a USB Flash drive USB 3.0 32GB OK? Thanks
David V.

On Tue, Oct 16, 2018 at 9:38 PM Ronin OfStag <roninofstag@xxxxxxxxx>
wrote:

Anyone travelling from and back to Mississauga, then?

On Tue, Oct 16, 2018, 19:03 Nostalgic for the 70's & 80's, <
superbrother1968@xxxxxxxxx> wrote:

Thanks Golan for all this helpful info. I am going by Canada Computers
tomorrow to pick up a USB Flash Drive.
David

On Tue, Oct 16, 2018 at 4:00 PM Golan Klinger <gklinger@xxxxxxxxx>
wrote:

Yeah, perhaps clarification is in order.

The C64 Mini has two USB 2.0 ports on the side for connectivity and a
single micro USB port on the rear for power.

Thus far, I have been discussing the connectivity ports. If you wish to
use three USB peripherals like the included joystick, a keyboard, and a USB
flash drive, you will require a USB hub. I am using an unpowered hub and it
works but depending on the power usage of the items you plug in, you may
require a powered hub.

The micro USB port on the back power the C64 Mini itself. While a micro
USB to USB cable is included, you will require a AC to USB adaptor like the
ones that come with phones and tablets etc. You’ll also find USB ports on a
lot of power bars these days. If you’re going to use the C64 Mini with just
the included joystick, a 5V/1A power adaptor is fine. If you’re going to be
plugging in additional items, you may need to give it more power (1.5A or
2A should do it.)

I am using an unpowered hub for connectivity and a 5V/2.4A AC to USB
adaptor.

THAT should clarify things. ;)

Golan Klinger
Four legs good, two legs bad.


Other related posts: