Jim, The configuration that causes me this headache is: Me --> WinXP/MSTSC6 --> Any_Windows_2003 or Me --> Vista/MSTSC6 --> Any_Windows_2003 It probably doesn't occur when you turn off "Use client-provided logon information" within Terminal Services Configuration at the server. I figure that's why my Windows 2000 boxes are immune. If you figure out how to prevent it, you get a gold star. Steve Raffensberger Sovereign Bank Email: sraffens@xxxxxxxxxxxxxxxxx ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Jim Medeiros Sent: Monday, February 25, 2008 4:50 PM To: thin@xxxxxxxxxxxxx Subject: [THIN] Re: Default Domain Hey steve. The good news is that I implemented your startup fix and it appears to be working. I tested it to make sure that it was whacking it first and it was. Thanks. My question is why does it only happen to 2 out of my 39 PS servers? I also noticed that the 6.0 client is not installed on the PS server, but I'm pretty sure I have it on my desktop that I am using to connect (MSTSC /Console). I'm just trying to get a hold of how to prevent the problem when we build the next server. Thanks! Jim On Mon, Feb 25, 2008 at 2:52 PM, Raffensberger, Stephen D <sraffens@xxxxxxxxxxxxxxxxx> wrote: This might be due to a Microsoft-induced double whammy that I've noticed: 1. Ever since NT 3.51, the behavior described by Russell has been there. It's by design. I'll reserve my comments on the quality of that particular design. 2. Ever since the installation of Terminal Server Client 6.0, my shortcut to "MSTSC /CONSOLE" has been using the above design to whack this registry key on any Windows 2003 target. If I don't use /CONSOLE, there is no problem. If I use the MMC snap-in with the console box checked, there is no problem. As a workaround, I created a .REG file with the correct domain and made a shortcut in my Startup folder pointing to regedit /s with the .REG file as an argument. That way, every time I whack it, I fix it. Jim - if you reboot and then login with MSTSC /CONSOLE to check, it will appear that your GPO didn't apply. In fact, it may have and you subsequently whacked it. Steve Raffensberger CSG Citrix Administrator Sovereign Bank Email: sraffens@xxxxxxxxxxxxxxxxx ________________________________ From: thin-bounce@xxxxxxxxxxxxx [mailto:thin-bounce@xxxxxxxxxxxxx] On Behalf Of Russell Robertson Sent: Monday, February 25, 2008 1:22 PM To: thin@xxxxxxxxxxxxx Subject: RE: [THIN] Default Domain Jim Have you tried logging in via the console with the domain name you want? We've found that even with registry settings, the last login domain carried out on the console persists. Any additional advice on this would be appreciated. Cheers Russell Russell Robertson | Virtual Stream | Microsoft, Citrix and VMware advisers | ________________________________ From: thin-bounce@xxxxxxxxxxxxx on behalf of Jim Medeiros Sent: Mon 25/02/2008 16:14 To: thin@xxxxxxxxxxxxx Subject: [THIN] Default Domain We have just recently added two new servers to our PS 4.0 farm (Win2k3). During the setup we set the registry defaultdomainname setting (HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon). However, every time the server reboots (we set the reboot schedule to once per week) this registry setting is removed (left blank). Using Microsoft's RSoP tool I cannot see any GPO that would be removing this setting. We even tried creating an .adm file to assign to the local security policy that will set the Default Domain Name but that only works when we run it manually (GPUPDATE /Force), it doesn't appear to be applied when the server reboots. Has anyone see this problem or have any ideas how I might be able to troubleshoot it? thank you in advance. Jim This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail, and delete or destroy the message. Thank you. -- I'm voting for Ron Paul for President http://www.ronpaul2008.com This message contains information which may be confidential and privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail, and delete or destroy the message. Thank you.