[TechAssist] Re: magnovox ts2575 25f800 chassis
- From: "Damon" <DAMON101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Wed, 28 Nov 2001 20:37:43 -0500
I think the 129 volts you're getting is normal, 140 volts is not.
Damon Brunger
damon101@xxxxxxxxxxxxxx
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, November 28, 2001 2:15 PM
Subject: [TechAssist] Re: magnovox ts2575 25f800 chassis
>
> You didn't say whats wrong with unit.
> Phillip R Hull
> phil245@xxxxxxxxxxxxx
> ----- Original Message -----
> From: "al m" <ampm@xxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Wednesday, November 28, 2001 1:23 PM
> Subject: [TechAssist] magnovox ts2575 25f800 chassis
>
>
> >
> > i'm stuck on this one. manual calls for 140v on main output on
> regulator.i
> > got 129v checked all outputs for caps and diodes regulator has correct
> > voltage on every pin. manual says turn down ac voltage and check
> > outputs,same thing did anyone see this before the troubleshooting guide
is
> > vague on what to do, it doesn't tell what to check if the voltages are
> wrong
> > only if they're not there. any tricks would be appreciated been on this
a
> > long time and am in the same spot duh!!!!!
> > al marquardt
> > ampm@xxxxxxx
> >
> >
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> >
> >
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
