You didn't say whats wrong with unit. Phillip R Hull phil245@xxxxxxxxxxxxx ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, November 28, 2001 1:23 PM Subject: [TechAssist] magnovox ts2575 25f800 chassis > > i'm stuck on this one. manual calls for 140v on main output on regulator.i > got 129v checked all outputs for caps and diodes regulator has correct > voltage on every pin. manual says turn down ac voltage and check > outputs,same thing did anyone see this before the troubleshooting guide is > vague on what to do, it doesn't tell what to check if the voltages are wrong > only if they're not there. any tricks would be appreciated been on this a > long time and am in the same spot duh!!!!! > al marquardt > ampm@xxxxxxx > > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe