[TechAssist] Re: Sony LCD proj KF50XBR800 picture intermittent on/off

  • From: tjanphyl@xxxxxxxxxxxxxxx
  • To: techassist@xxxxxxxxxxxxx
  • Date: Sun, 26 Jun 2005 19:47:49 -0400

Not to sound like an ol timer stuck in the past, but these LCDs (DLPs)
seem to be a royal blue blooded pain in the arse compared to the 
standard CRT based projos. Seem like a primadonna with a list of 
fragilities a mile long. I'll keep my Sony 65" CRT/PTV as long as 
possible.
Phil

----- Original Message -----
From: Rich M <rmsrepair@xxxxxxxxxxx>
Date: Sunday, June 26, 2005 7:15 pm
Subject: [TechAssist] Re: Sony LCD proj KF50XBR800 picture 
intermittent on/off

> 
> 
> 
> 
> 
> I always replace the lamp and ballast the first go around, also 
> educate the
> customer on the proper use of the et. 
> 
> 1. make sure there is a lot room around the unit for proper 
> ventilation 
> 
> 2. make sure the unit is not on a switched  outlet 
> 
> 3. better to leave the unit on between shows if only 30 min to 2 
> hours a
> part,  the cooling and heating of the lamp decrease the lamp 
> life., 
> 
> 4. don't move the tv after you turn it off because the lamp is 
> very fragile,
> give it a couple hours to cool 
> 
> 5. Also put the unit on a U.P.S battery backup. So if you lose 
> power the
> lampstill have time to cool. then turn off set. 
> 
> 
> 
> 
> 
> 
> >From: "tvservice" <tvservice@xxxxxxxxxxxxx>
> >Reply-To: techassist@xxxxxxxxxxxxx
> >To: <techassist@xxxxxxxxxxxxx>
> >Subject: [TechAssist] Sony LCD proj KF50XBR800  picture 
> intermittent on/off
> >Date: Fri, 24 Jun 2005 15:42:04 -0500
> >
> >Hi group,
> >am servicing this proj tv it will come on normal for about 1 
> minute then
> picture and sound go off, lamp goes out.
> >Just as it goes out the "standby led" starts blinking, at 30 
> blinks you
> heara click (relay) and at 4 more blinks picture and sound are 
> back. It will
> operate about another minute and repeat cycle.
> >Is this a lamp or ballast problem?
> >I remember seeing something posted about the Sony LCD projection 
sets
> havingsome ballast modification but I didn't save them.
> >Please any help would be appreciated
> >
> >Robert
> >tvservice@xxxxxxxxxxxxx
> >H &H Electronics Inc
> >------------------------------------------------------------------
> ---------
> --
> >This Email List is Public. Remove: http://www.tech-
> assist.org/remove.htm>Set Vacation
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> >Lost Password: http://www.tech-assist.org  and select "Login 
> Problems?".>Email Archives: 
> //www.freelists.org/archives/techassist/
> -------------------------------------------------------------------
> ----------
> This Email List is Public. Remove: http://www.tech-
> assist.org/remove.htmSet Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacationLost 
Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/

Other related posts: