Thanks for the info Phil I subbed the lamp and got same symptoms I see the service manual is available in the index I will request it and post my results after Independence Day. If anyone has the training manual please send it to supertek57@xxxxxxxxxxx I can handle up to 250 megs thanks Robert tvservice@xxxxxxxxxxxxx H & H Electronics Inc ----- Original Message ----- From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, June 24, 2005 4:15 PM Subject: [TechAssist] Re: Sony LCD proj KF50XBR800 picture intermittent on/off > These are all the results from my techrepairCD (intrepid-video) search > by model number...: > > Sony~KF50XBR800~Tries to start~~~~If the customer can hear the short ark > sound as the lamp tries to start then he needs a lamp~~~~~~ > > Sony~KF50XBR800~The standby LED blinks 6 times. No picture or sound~~~~6 > Blinks means that there is a Low B error. Check for +5V on the G board~~~~~~ > > Sony~KF50XBR800~The standby LED blinks 5 times. No picture or sound~Page > 8 of the service manual lists the diagnostic codes~~~5 blinks indicates > that the Lamp Driver is faulty. This means that the lamp or lamp driver > board may be defective~~~~~~ > > Sony~KF50XBR800~The standby LED blinks 3 times. No picture or > sound~~~~Check the lamp cover on the front of the unit as this error > indicates that it is not secured properly or that the sensor is > malfunctioning~~~~~~ > > Sony~KF50XBR800~Per Sony: These models have no known issues with their > lamps so please do not change lamps or lamp drivers unnecessarily.~Also* > the lamp is intended to be a customer replaceable item so a service call > to the home is not required if the lamp does go out~~LCD~The power > block is 1-468-510-13 item location #201 119 ! A-1601-753-A LAMP BLOCK > ASSY (RP) gets you a light bulb~~~~~~ > > Sony~KF50XBR800~Lamp LED flashes. No picture and no sound~~~~The lamp is > burned out~~~~~~ > > HTH, > Phil Bader > > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > > > tvservice wrote: > > >Hi group, > >am servicing this proj tv it will come on normal for about 1 minute then picture and sound go off, lamp goes out. > >Just as it goes out the "standby led" starts blinking, at 30 blinks you hear a click (relay) and at 4 more blinks picture and sound are back. It will operate about another minute and repeat cycle. > >Is this a lamp or ballast problem? > >I remember seeing something posted about the Sony LCD projection sets having some ballast modification but I didn't save them. > >Please any help would be appreciated > > > >Robert > >tvservice@xxxxxxxxxxxxx > >H & H Electronics Inc > >--------------------------------------------------------------------------- -- > >This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > >Lost Password: http://www.tech-assist.org and select "Login Problems?". > >Email Archives: //www.freelists.org/archives/techassist/ > > > > > > > > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/