[TechAssist] Re: Sony KP53S35 Chassis-SCC-N22B-A
- From: "LeRoy Westlund" <llw@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 10 Mar 2005 11:24:39 -0700
No,...but, you said you had sound. So just check it, like I said.
LLW
LeRoy Westlund
Westlund TV & Electronics
97 North Main " I forgot,..to remember,..
Centerfield, UT 84622-0087 to forget "
Ph./Fax 435-528-3822
mailto:LLW@xxxxxxxxxx
-----Original Message-----
From: Ed Gaidies <teltek@xxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Thursday, March 10, 2005 10:53 AM
Subject: [TechAssist] Re: Sony KP53S35 Chassis-SCC-N22B-A
>IK shut down shouldn't kill the whole set? should it?
>
>-Ed-
>
>LeRoy Westlund wrote:
>
>>Ed,
>>The set could be in IK shut down.
>>Look directly into the tubes, and you will see a horz line at the very
>>bottom of the raster on each tube. If this is the case, one of the CRTs
>>could be weak. Start with the blue tube first, and turn the screen up a
>>little bit at a time, then do the same with the other 2 tubes. If one is
>>weak, it should come out of IK shut down.
>>
>>Also, check close for coolant leakage, most likely the blue tube.
>>Check for coolant on the ckt. boards directly under the leaky tube.
>>(Very common problem.)
>>
>>HTH,
>>LLW
>>
>>LeRoy Westlund
>>Westlund TV & Electronics
>>97 North Main " I forgot,..to remember,..
>>Centerfield, UT 84622-0087 to forget "
>>Ph./Fax 435-528-3822
>>mailto:LLW@xxxxxxxxxx
>>
>>-----Original Message-----
>>From: Ed Gaidies <teltek@xxxxxxxxx>
>>To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
>>Date: Thursday, March 10, 2005 9:44 AM
>>Subject: [TechAssist] Sony KP53S35 Chassis-SCC-N22B-A
>>
>>
>>
>>
>>>Guys;
>>>Need some advice on this R/P set.
>>>Customer brought it in, and said he had sound...but no picture.
>>>When I tried it...he was right, but power light was continually
>>>flashing, but did have sound.
>>>When I pulled the back off, I noticed the Anode lead for the Red CRT had
>>>been pulled from the Splitter. I re-inserted it, and now when I turn it
>>>on...set tries to start, but just blurps about every second. By pulling
>>>the red 2nd anode...does this point to a bad splitter or bad Red
>>>CRT...or what?
>>>
>>>This Sony is my first of this breed. Thanks.
>>>
>>>-Ed-
>>>
>>>--
>>>Ed Gaidies
>>>Tel-Tek Electronics
>>>Ontario-Canada
>>>
>>>teltek3@xxxxxxxxxxxx
>>>teltek@xxxxxxxxx
>>>
>>>-------------------------------------------------------------------------
--
>>>
>>>
>>--
>>
>>
>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>>Email Archives: //www.freelists.org/archives/techassist/
>>>
>>>
>>>
>>
>>--------------------------------------------------------------------------
---
>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>>Email Archives: //www.freelists.org/archives/techassist/
>>
>>
>>
>
>--
>Ed Gaidies
>Tel-Tek Electronics
>Ontario-Canada
>
>teltek3@xxxxxxxxxxxx
>teltek@xxxxxxxxx
>
>---------------------------------------------------------------------------
--
>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>Lost Password: http://www.tech-assist.org and select "Login Problems?".
>Email Archives: //www.freelists.org/archives/techassist/
>
-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Lost Password: http://www.tech-assist.org and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
Other related posts:
