My guess would be bad tube. Put the red in another input and see what happens. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "Ed Gaidies" <teltek@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, March 10, 2005 11:43 AM Subject: [TechAssist] Sony KP53S35 Chassis-SCC-N22B-A > Guys; > Need some advice on this R/P set. > Customer brought it in, and said he had sound...but no picture. > When I tried it...he was right, but power light was continually > flashing, but did have sound. > When I pulled the back off, I noticed the Anode lead for the Red CRT had > been pulled from the Splitter. I re-inserted it, and now when I turn it > on...set tries to start, but just blurps about every second. By pulling > the red 2nd anode...does this point to a bad splitter or bad Red > CRT...or what? > > This Sony is my first of this breed. Thanks. > > -Ed- > > -- > Ed Gaidies > Tel-Tek Electronics > Ontario-Canada > > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/