$50.00 EACH PLUS SHIPPING THEY ARE AS THE PICTURE . agower@xxxxxxxxxxxxx Cordova TV Adolph Gower 3415 Comet Court Sacramento, Ca. 95827-2924 Phone: (916) 698-6565 Fax: (916) 363-8359 ----- Original Message ----- From: "Old TV Man" <mebonnell@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: 2005Äê4ÔÂ5ÈÕ 8:07 Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM Question (FIXED) > Adolph - why don't you offer a price. > > Max Bonnell > Bonnell TV > Robinson, IL > > Sender: techassist-bounce@xxxxxxxxxxxxx From: > agower@xxxxxxxxxxxxx(<agower@xxxxxxxxxxxxx>) Date: Mon, Apr 4, 2005, > 9:09pm (CDT-2) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: > Samsung TV - TXE2749 - KCT52A - EPROM Question (FIXED) Reply=A0to: > techassist@xxxxxxxxxxxxx > > I have 2 of the ESR units that you are talking about will sell both of > them name your price!! > agower@xxxxxxxxxxxxx > > Cordova TV > Adolph Gower > 3415 Comet Court > Sacramento, Ca. 95827-2924 > Phone: (916) 698-6565 > Fax: (916) 363-8359 > > ----- Original Message ----- > From: "J. Knoll" <jaystv@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: 2005=C4=EA4=D4=C24=C8=D5 16:48 > Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM Question > (FIXED) > Jonas, > > =A0=A0Did your esr meter fail? What kind of esr meter do you use? I have > found testing the value of an electrolytic is less important than > testing for esr. I have an old analog esr meter made by a company that > has been out of business now for years, Creative Electronics out of > Michigan. If I had known they were going to close down I would have > bought another from them. They were very well made units. I have seen > some of the newer ones and am not impressed with the quality. > -- > Jay Knoll TechAssist Monitor > TechAssist > 225 Monticello Ave. > Clarksburg WV, 26301 > www.tech-assist.org www.techassist.net > ---------------------------------------------- > PS: > If replying to this email, please include all previous correspondence. > It is the only way we can get the full picture. Thank You!!! > > On Apr 4, 2005 7:35 PM, jonas miglinas <miglinasj@xxxxxxxxxxx> wrote: > Hello David, > I read again your original thread, and saw that Eric Manuel suggested to > replace C816 1000uf/25v (thanks Eric). I replaced it and VOILA, set > fired up. I had esr'd it originally and it was ok, the value was at 945 > and I thought it was close enough. So I dusted off my Sprague Tel-Ohmike > and checked it under a load, and sure enough, it craps out at about > 10.5v. I replaced all the original ic's back into the set and has been > running as it > should for three hours now. > I saw that you had changed that cap also, may want to check it again. If > still no 12v, unsolder pin 1 of IC 853 and see if the 12v comes up. I > found > originally a 100uf/16v(that is tied inton this IC) down to about 40uf > (damn, > I don't remember the location #, but it's in front of IC 853). Let me > know > if you need the location #. > > Jonas Miglinas > Miglinas TV > Chicago > > ----- Original Message ----- > From: "jonas miglinas" <miglinasj@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, April 03, 2005 3:10 PM > Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM Question > > Hello David, > I am experiencing the exact same problem. No start because the 12v and > 5v > supplies are missing. Have changed IC 852 and HC 802?(not at the office > and not sure of the numbers). When I take out either one of these the > 12v comes back. Decided to check the micro, and saw the VDD at .6v at > standby. Unsoldered, and the 5v came up. I have a spare chassis I saved > that came > with a brocken crt and board, and swapped out the the micro. Set came on > at > once and I thought I had it. I turned the set off and on about 5-6 > times, > unplugged it, yep you guessed it, same thing. Worked on this set about > three hours saturday without a schematic and decided to search the Tech > Assist archives when I ran across your thread. > I > have to exchange a couple of Thomson HD sets tomorrow(crt's not > available) > so I won't be able to attack this set till Tuesday. Of course I'll let > you know what I find. Client doesn't want to spend more than $100 so I > won't spend too much more > time, unless this gets my goat. > Maybe there is somethig in Winstips for this model, or these models > which > should be close: > TXE2545 > TXE2546 > TXE2549 > TXE2745 > TXE2746 > > Jonas Miglinas > Miglinas TV > Chicago > > ----- Original Message ----- > From: "David Lessard" <mr_fixit@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Sunday, April 03, 2005 11:28 AM > Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM > Question > > Jonas, > Are you experiencing the same problem I am with this TV? Please let me > know, perhaps between the two of us we can figure this out! > > David Lessard > Mr_fixit@xxxxxxxxxxxx > Alexandria, Ontario, Canada > > -----Original Message----- > From: techassist-bounce@xxxxxxxxxxxxx > [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Eric Manuel > Sent: Sunday, April 03, 2005 9:39 AM > To: techassist@xxxxxxxxxxxxx > Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM > Question > > Hi Jonas put an eeprom from a rca set then plug the tv in leave it for 3 > or 4 minutes to give the micro time to write the eeprom.Works for > me..Eric > > =A0=A0=A0=A0=A0=A0Eric > E M Electronics > Deer Lake Nfld > Canada > tvman@xxxxxxxxxxxxxxx > > jonas miglinas wrote: > Hello David, > Did the eeprom switch work? I just came across the same model as yours > and > was wondering if you gave up on it? > > Jonas Miglinas > Miglinas TV > Chicago > > ----- Original Message ----- > From: "Eric Manuel" <tvman@xxxxxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Tuesday, March 29, 2005 7:42 AM > Subject: [TechAssist] Re: Samsung TV - TXE2749 - KCT52A - EPROM > Question > > Hi David you can put in an Eeprom from a rca tv and it should work as > long as the micro is ok.All the samsung eeprom I seen was blank as the > settings are stored in the micro > > =A0=A0=A0=A0=A0=A0Eric > E M Electronics > Deer Lake Nfld > Canada > tvman@xxxxxxxxxxxxxxx > > David wrote: > What are the symptoms of a defective EEPROM on this chassis? No startup? > With the EPROM removed should I see mirco data activity? > > David Lessard > Mr_fixit@xxxxxxxxxxxx > Alexandria, Ontario, Canada > ---------------------------------------------- > ---- > --- > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/