[TechAssist] Re: RCA/Proscan Proj.TV, model PS60682....Dead, but chirping

  • From: "Jeff Dougherty" <jeff@xxxxxxxxxxxxxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Wed, 27 Mar 2002 16:02:52 -0500

I second this, Clint.
Jeff

FAX 717-564-4952
Jeff Dougherty
Intrepid Video & Electronics
501 Luther Rd
Harrisburg, PA 17111
717-909-8844
VCR tips, electronics info & general interest.
www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com


----- Original Message -----
From: "John Wilkins Jr." <jwilkinsjr@xxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, March 27, 2002 1:31 PM
Subject: [TechAssist] Re: RCA/Proscan Proj.TV, model PS60682....Dead, but
chirping


>
> Clint-
>
> Remove the anode lead out of the High Voltage splitter block and dress out
of the
> way.  If High Voltage comes on and stays up, it is a bad splitter block.
Very
> Common on these- Make sure if you change the block to remove the old
gaskets on
> the high voltage leads and re-use them, and clean and repair any arcing
damage to
> the anode lead.
>
> HTH
> --
> John E Wilkins Jr., CSM/A+
> Home TV Service
> 3468 So. Main St.
> Salt Lake City, UT  84115
>
> Phone (801) 486-5641
> Fax   (801) 467-2294
>
> mailto:hometvservice@xxxxxxxxx
>
>
> VideoVann@xxxxxxx wrote:
>
> > Folks....Fairly new to the list so please be gentle...Good customer, of
many
> > years, came in & said above set was chirping like a cricket and wouldn't
turn
> > on. He plugged it in & out of the wall many times, drawing "sparks"
(from
> > wall plug) unitl chirping disappeared. Now, when he turns it on with
power
> > button gets only one chirp (no turn on) and won't react to Remote turn
on. I
> > Have been a hard working bench tech for 31 yrs, little experience  with
> > projct.TV's...am going to his house as a courtesy. Anything you can arm
me
> > with would be greatly appreciated.
> >           Thanx, in advance, Clint Vanorsdell dba Video Van, 90 Rockland
St.
> > Hanover, MA 02339, 781-826-8983, Email @ videovann@xxxxxxx
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
>
>
>
>
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>

------------------------------------------
Make your TechAssist database better!  
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 03-2002