Be sure to check the connections at the yoke plugs.on the yokes themselves. -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Gary Pahls Sent: Monday, August 11, 2003 7:33 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Mitsubishi VS4544 - Vertical Output info. Can someone tell me the proper voltage readings for the vertical output in this unit. It is using a LA7845. The unit has no picture or menu's, High voltage is fine. The V-Ouput IC and associated circuit had several bad solder connections and I suspect the IC got overstressed and blew. The B+ line to pin 2 is fine. Since I have no prints on this unit and it is 16 miles away I would appreciate any and all help. Thanks, Gary Pahls Beloit Entertainment Center Beloit, KS ************************************************************************ ***** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/