As I said..it is possible. Providing all the settings are correct. RF ..VCR will accept all CH in, but will only Output CH 3 or 4. So second VCR would have to be set on 3 or 4 to accept the signal from the first VCR, then the TV would have to be set to CH 3 or 4 to accept the output of the second VCR. Then you have to make sure TV/VCR is on the right setting..and so on and so on. I'm sure somewhere on the wide net there are diagrams to explain this hook up. Almost need to be a Tech to hook it up right. And don't try operating this kind of hook-up after a few beer, then things can really get confusing..;-) -Ed- Tel-Tek Electronics Ontario-Canada "If Apple and Microsoft can talk...why can't the rest of the World?" teltek2@xxxxxxxxxxxx ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 16, 2003 11:09 PM Subject: [TechAssist] Re: JVC vcr fundamentals > > He had one vrc hooked up to Rf in and out and the other just hooked up to > the video ins and outs. can't see how he expected the video on input on the > TV to work. > al marquardt > ampm@xxxxxxx > > > ----- Original Message ----- > From: "Ed Gaidies" <teltek3@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, January 16, 2003 6:46 PM > Subject: [TechAssist] Re: JVC vcr fundamentals > > > > > > Al; > > You didn't mention what he had going from the "out" of one to the "In" of > > the other. Video and Audio or RF. However it is possible to hook these up > in > > a "daisy chain" fashion, but the second VCR has to be switched to Ch3 or > Ch4 > > on the tuner, or has to be switched to receive the Line Input. He's > probably > > correct, but let him worry about that. You repaired the VCR's not his > arcaic > > system hook-up. Your job should have been done, even before the delivery. > > You still pick up and deliver VCR's????? > > > > -Ed- > > Tel-Tek Electronics > > Ontario-Canada > > "If Apple and Microsoft can talk...why can't the rest of the World?" > > > > teltek2@xxxxxxxxxxxx > > ----- Original Message ----- > > From: "al m" <ampm@xxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Thursday, January 16, 2003 5:17 PM > > Subject: [TechAssist] JVC vcr fundamentals > > > > > > > Just came back from a guys house and I fixed two JVC vcrs for him. I > > carried them in gave them to him and he hooked them up. He went to video > on > > the TV and put a tape in. No picture! I take a look at the back of the > vcrs > > and he has the out on the top one going to the in on the bottom one, and > the > > out on the bottom one going to the in on the top one.I said you got > nothing > > going to the TV for A / V outputs, he says yes I do and he points to the > RF > > cords. I told him it won't work like that but he insisted he's been doing > it > > like that for 18 yrs. My question is, is he nuts or am I a little behind > on > > technology? I hooked it up like it should be but he wasn't happy and said > > he'll straighten it out because he's been doing it a long time. He'll give > > me a call if he can't get it right.Just wanted to tell you guys about part > > of my day thanks for listening. Guy has me pissed off. > > > al marquardt > > > ampm@xxxxxxx > > > > > > > > > ------------------------------------------ > > > Submit A Repair Tip For Everyone Here: > > > http://www.tech-assist.org/secure/tip/main.html > > > ------------------------------------------ > > > To REMOVE your email address, click here: > > > http://www.tech-assist.org/unsubb.html > > > To CHANGE your email address, click here: > > > http://www.techassist.net/forms/change.html > > > > > > > ------------------------------------------ > > Submit A Repair Tip For Everyone Here: > > http://www.tech-assist.org/secure/tip/main.html > > ------------------------------------------ > > To REMOVE your email address, click here: > > http://www.tech-assist.org/unsubb.html > > To CHANGE your email address, click here: > > http://www.techassist.net/forms/change.html > > > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html