[TechAssist] Re: JVC VCR HR-VP639U
- From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 3 Jan 2002 13:28:04 -0500
Thanks Ken....
That makes sense, since the customer brought in a small spring taped to one
of the VCR's.
I was under the impression it was from the tape basket itself. Hmmm.
I'll have a look and see if I can find were it goes, or maybe I have a good
one here in tact, that I can check.
Let you know how it works out.
-Ed-
teltek@xxxxxxxxxxx
TEL-TEK ELECTRONICS.
----- Original Message -----
From: <gulftech@xxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, January 03, 2002 9:43 AM
Subject: [TechAssist] Re: JVC VCR HR-VP639U
>
> Ed,
>
> I hope I can describe this so that it helps. There is a plastic bar I
> call an operating bar. It can be white or black, located on the top of
> the chassis beneath the loader. Look for a small spring which should
> attach to the bar at the front side about one-third of the way down. The
> post that holds the spring to the bar breaks and causes what you mention.
>
> I'm writing this from memory second hand. Don, my VCR man, has shown
> this to me many times. He does not replace the "bar." He drills a tiny
> hole in the bar to reattach the spring.
>
> Let us know what you find.
>
>
> Ken Smith
> Gulf Technical Services
> 3034 Gulf Breeze Parkway
> Gulf Breeze, FL 32561
> 850-934-8324 (Voice) 850-932-0819 (Fax)
>
> ------------------
>
>
> On Thu, 3 Jan 2002 00:00:22 -0500 "Jeff Dougherty"
> <jeff@xxxxxxxxxxxxxxxxxx> writes:
> >
> > Ed,
> > I have this for several HRVP models.
> > Didn't you look in your Tech Repair CD program?
> > DEFECTIVE IC1 (LOADING DRIVE MOTOR)- (BA6418N) ECG #7042-
> > LOCATED ON DECK TERMINAL. BOARD ATTACHED TO BOTTOM OF DECK.
> > Also:
> > LOADING PROBLEMS- SPLIT WASHER- HOLDING CONTROL PLATE COMES OFF
> > REPLACE CONTROL CAM #LP20003-001A & PLATE LP10004-001B
> > These aren't for your exact model, so let me know if either helps,
> > so I can
> > add it.
> > Jeff
> > HAPPY HOLIDAYS:PEACE ON EARTH
> > mailto:Jeff@xxxxxxxxxxxxxxxxxx www.9-11-2001tragedy.com
> > FAX 1-413-280-0677
> > Intrepid Video & Electronics
> > Harrisburg, PA 17111
> > 717-909-8844
> > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com
> > ----- Original Message -----
> > From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
> > To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
> > Sent: Wednesday, January 02, 2002 3:56 PM
> > Subject: [TechAssist] JVC VCR HR-VP639U
> >
> >
> > >
> > > Anyone spend any time oin these as far as "no Loading" of cassette.
> > > Have 2 identical models here, and VCR will not accept tape.
> > > Since I have 2 here, maybe someone has run across one of these at
> > some
> > time,
> > > and actually fixed the problem, and made a note on the fix.
> > > Display is on, and if I complete the load, manually, seems to work
> > Play,
> > > rewind, FF. But then will not unload the tape.
> > >
> > > Thanks;
> > >
> > > -Ed-
> > >
> > > teltek@xxxxxxxxxxx
> > > TEL-TEK ELECTRONICS.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------------------
> > > Help make your TechAssist database better!
> > > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> > >
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
