Alvin, First of all, you need to unsolder L14401, clean the pins and resolder..on any of these you get in as preventive maintenance. You generally can not see the bad joint because the leads for the coil are so thin. From Tech Repair CD: RCA \CTC203\No Video\\\CTC203\Comb Pcb Was Not Pushed All The Way Down\\\\\\\\ RCA \CTC203\Video No Go - Slick Raster - No Sound. Says No Signal. Problem Is Intermittent\\\CTC203\Found A Defective Ii60 Ic If Processor Ic Part# 256833\\\\\\\\ RCA \CTC203\Video No Go. Has OSD And Menu. Good Audio\\\CTC203\Saw Filter Sf12301 M1976m\\\\\\\\ Jeff Dougherty Intrepid Video TV/VCR 263 S Front St Steelton PA 17113 ph..717-939-7708 fax...717-564-4952 www.intrepid-video.com www.tech-repair.net A positive attitude may not solve all your problems, but it will annoy enough people to make it worth the effort. ----- Original Message ----- From: "Alvin Rose" <ajroseca@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, April 13, 2004 11:54 PM Subject: [TechAssist] GE (rca) Model 27GT630 chassis CTC203AA9 no video Hi Guys We have a CTC-203AA9 chassis with no video..In the video audio mode.. the sound is ok but on the screen it says unusable signal..Checked the coil L14401 but it is not unsoldered and can find no bad solder joints Any help would be appreciated Alvin Rose Radio & Tv Centre Marystown, Nl ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/