I'm sure BDR made more then one. That's easy to check cause of the difference
in the design.
Let me do an accurate check on what Chris and I fabricated and the cost then
I'll give a more accurate and complete report.
I you remember the 'save the pads' campaign we were budgeting $400 per pad so
want to say that's what we paid
ea. for the BDR units.
Jimmy F.
TRA 12524
From: Jack Garibaldi
Sent: Wednesday, October 28, 2015 10:36 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Quad Pods
Hey Jimmy
BDR only made 1, remember the paint didn’t cure and we couldn’t fold down the
pad all the way and something with the legs that is why we changed a few things
and now have these finished products perfected, I am not bashing Ron I like Ron
but remember when we posted that right fully so he blasted us, I just remember
all the grass and dirt sticking to it and he didn’t have the buying power
either.
Jack
From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx]
On Behalf Of Jimmy F.
Sent: Wednesday, October 28, 2015 10:21 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Quad Pods
Sorry for the late reply, just turned on my computer.
I believe Chris and I fabricated 8 total new pads for the club. I will check to
make sure of that count.
The club now has 12 total. If I remember correctly BDR made the first 4, then
Chris and I made 2 on a first run to make sure we
liked our design tweaks. Once TCC gave the input on a final design we
fabricated the last 6. I know for sure the last batch was 6 units
cause I found a pic of them after we assembled them. The cost part I am not too
sure of, Chris did most of the purchasing and procurements.
I will dig in to this and provide more info. I want to say they were ~$300 ea.
and the last 6 units were a little less due to more materials volume
yielded a small discount.
Jimmy F.
TRA 12524
From: Richard King
Sent: Wednesday, October 28, 2015 9:27 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Quad Pods
I’m sure about the dollar amounts, but NOT sure how many that money bought.
That’s why I am deferring to Jimmy to see if he has a record of how many he
made. I know one reason we went with Jimmy was a better job at a better price.
No ceramic blast plate.......
RK
From: Jack Garibaldi
Sent: Wednesday, October 28, 2015 9:12 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Quad Pods
Well some one is either looking at the wrong bill or bullshitting me I wish I
paid $210.00 Jimmy or Chris can chime in because even the club didn't pay
$210.00 I will pull the old e-Mails on what we were quoted.
Jack
Sent from a Mil-Spec IPhone 6 Plus
On Oct 28, 2015, at 6:49 PM, Richard King <drrbk@xxxxxxxxxxx> wrote:
In May of 2013 I wrote a check to the Francos for $1000 for the quad pods.
Then after OS, I wrote them the balance for $1100. So, a total of $2100 for
the ten (ten?).
RK
From: Jack Garibaldi
Sent: Wednesday, October 28, 2015 12:49 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Quad Pods
Richard K, Chris F, Jimmy F, James D
Hey Guys
I have a brand new quad pod from the last batch that the Franco’s made for
the club and I had them make one extra and I paid them directly. Richard or the
Franco’s do you know what we paid for them I want to say it was in the $380.00
to $450.00 range because they made 7 or 8 at a time. After we dig up the price
would the club buy mine back? It has never had a rocket fire off of it and I
have some rails I will throw in both ¼” and 5/16’ rails that the club can have
also, then I also have my Blue big pad that handles the big boy rockets that I
would like to discount down and get rid of too all Mil-Spec shit for cheap
Jack G
------------------------------------------------------------------------------
This email has been checked for viruses by Avast antivirus software.
www.avast.com
--------------------------------------------------------------------------------
This email has been checked for viruses by Avast antivirus software.
www.avast.com
