[tcb] Re: Technical Question Alert!
- From: Bbauer2000 <bbauer2000@xxxxxxxxx>
- To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx>
- Date: Sun, 14 Dec 2014 16:00:56 -0600
Thrust bearing in motor. How long ago was the motor rebuilt? What was the end
play? Was the case cut?
> On Dec 14, 2014, at 3:53 PM, "Ronnie Hughes" <dmarc-noreply@xxxxxxxxxxxxx>
> (Redacted sender "fracdogii@xxxxxxxxx" for DMARC) wrote:
>
> I didn't try kicking it into neutral.
>
> Just if you are going along and push the clutch in the noise stops.
>
> From: Denis <coocoo@xxxxxxx>
> To: tcb@xxxxxxxxxxxxx
> Sent: Sunday, December 14, 2014 3:50 PM
> Subject: [tcb] Re: Technical Question Alert!
>
> It rumbles when you are rolling in neutral?
>
> From: mailto:dmarc-noreply@xxxxxxxxxxxxx
> Sent: Sunday, December 14, 2014 3:16 PM
> To: Tcb
> Subject: [tcb] Technical Question Alert!
>
> Okay, I drove my bus a couple of hundred miles this weekend and when I'm
> cruising down the highway I can hear a low roar or rumble. If I coast it
> continues, but if I push the clutch in it stops.
>
> I replaced the clutch, throw out bearing and pressure plate when I was
> rebuilding the bus so they only have a few 1,000 miles.
>
> I replaced the rear transmission mounts, but not the fronts.
>
> What do you think?
>
> Ronnie
>
>
>
>
>
> This email has been checked for viruses by Avast antivirus software.
> www.avast.com
>
>
>
Other related posts:
