The SmartVision2 doesn't do very well with Bluetooth at all. It basically only
can handle 1 device at an time and doesn't do that well either. If you are
doing system updates! Don't use Bluetooth at all. You can have problems.
The download for the update is about 984MB in size. So depending on your
internet Wi-Fi speed and knowing how slow the SmartVision2 is at downloading
things! Plan on it taking about 30 minutes or so to download. Then allow a good
20 to 30 minutes for it to install. I would suggest that you plug your phone in
for the update if you have less than 50% of battery.
You probably not been using Wi-Fi at all. The phone by default has Mobile Data
turned on. Like Sam said; When you do an Hash+1, the Wi-Fi needs to say
connected. Myself, I keep Mobile Data turned off. That away I'm ensured Wi-Fi
will always be used.
Signed: Stephen Giggar
Hardware eventually fails, software eventually works.
No amount of bandwidth can fix poor design.
-----Original Message-----
From: smartvisionau-bounce@xxxxxxxxxxxxx
[mailto:smartvisionau-bounce@xxxxxxxxxxxxx] On Behalf Of Vivien Palcic
Sent: Saturday, June 29, 2019 3:34 AM
To: smartvisionau@xxxxxxxxxxxxx
Subject: [smartvisionau] Re: Can't download/install latest system update (I
keep getting "network connection failed" and Wifi is on but "not connected"
when I check in status info)
Sam,
I've tried this and it's telling me "authentication problem", and it was even
telling me bluetooth was not connected a while ago when I checked with the hash
and 1 shortcut; yet I was using my Brailliant BI display connected via
bluetooth! I've now gone into wifi, did Refresh, tried connecting again, to no
avail.
Vivien
On 6/29/2019 2:15 PM, Sam Taylor | Pacific Vision wrote:
When pressing hash and 1, your WiFi state should be connected.******************************************************
Go into settings, WiFi, and connect to a WiFi network.
Sam Taylor
Blindness Products Consultant
Pacific Vision International (Aust) Pty Ltd
Tel: 1800 756 849
Mob: 0420 355 996
Sam@xxxxxxxxxxxxxxxxxxxx
www.lowvision.com.au
Twitter: @PacificVisionAU
To request a quote:quotes@xxxxxxxxxxxxxxxxxxxx To place an
order:orders@xxxxxxxxxxxxxxxxxxxx For general
enquiries:office@xxxxxxxxxxxxxxxxxxxx
CONFIDENTIALITY: The information contained in this electronic mail message
and any accompanying documents may be legally privileged and confidential.
The information is intended only for the recipient named in this message. If
the reader of this message is not the intended recipient you are notified
that any use, disclosure, copying or distribution of the information is
prohibited. If you have received this message in error please notify us
immediately by return e-mail and delete this message and any accompanying
attachments from your computer system. Pacific Vision is not responsible for
any changes to this message and/or any attachments made after transmission by
Pacific Vision.
Pacific Vision does not guarantee that this e-mail or any attachment to it is
free of computer viruses or other conditions which may damage or interfere
with data, hardware or software.
On 29/06/2019 4:02 pm, Annette & Lindsay Arndt wrote:
I am to getting the message.
-----Original Message-----
From:smartvisionau-bounce@xxxxxxxxxxxxx
[mailto:smartvisionau-bounce@xxxxxxxxxxxxx] On Behalf Of Vivien ;
Palcic
Sent: Saturday, 29 June 2019 11:33 AM To:smartvisionau@xxxxxxxxxxxxx
Subject: [smartvisionau] Re: Can't download/install latest system
update (I keep getting "network connection failed" and Wifi is on but "not
connected"
when I check in status info)
Sam,
It's telling me it's not connected.
Vivien
On 6/29/2019 9:14 AM, Sam Taylor | Pacific Vision wrote:
Vivien,and any accompanying documents may be legally privileged and confidential.
When you press hash and 1, does it tell you your Wifi is connected,
or not connected?
Sam Taylor
Blindness Products Consultant
Pacific Vision International (Aust) Pty Ltd
Tel: 1800 756 849
Mob: 0420 355 996
Sam@xxxxxxxxxxxxxxxxxxxx
www.lowvision.com.au
Twitter: @PacificVisionAU
To request aquote:quotes@xxxxxxxxxxxxxxxxxxxx
To place anorder:orders@xxxxxxxxxxxxxxxxxxxx
For generalenquiries:office@xxxxxxxxxxxxxxxxxxxx
CONFIDENTIALITY: The information contained in this electronic mail
message
The information is intended only for the recipient named in this
message. If the reader of this message is not the intended recipient
you are notified that any use, disclosure, copying or distribution of
the information is prohibited. If you have received this message in
error please notify us immediately by return e-mail and delete this
message and any accompanying attachments from your computer system.
Pacific Vision is not responsible for any changes to this message
and/or any attachments made after transmission by Pacific Vision.
Pacific Vision does not guarantee that this e-mail or any attachmentis free of computer viruses or other conditions which may damage or
to it
interfere with data, hardware or software.
On 29/06/2019 11:13 am, Vivien Palcic wrote:******************************************************
Hi list,
I've attempted several times to download and install the latest
system update available for the SmartVision2, but I keep getting
"network connection failed", even though I've been able to connect
to radio stations via the web radio and opened Chrome and the Play
store. Then when I check the notifications, I'm told wifi is "not
connected". I tried both last night and again this morning, both
with my desktop on/connected to the Internet and switched off, to
no avail, and I don't know how else I'm supposed to get wifi
connected on the phone when I've already connected before to the play
store, web radio etc.
Regards
Vivien
******************************************************
To post to SmartVisionAU, send email to:SmartVisionAU@xxxxxxxxxxxxx
Replies to emails on this list will go to the list by default.
General information about the list,ways to join, leave and set
options is at://www.freelists.org/list/SmartVisionAU
To post to SmartVisionAU, send email to:
SmartVisionAU@xxxxxxxxxxxxx
Replies to emails on this list will go to the list by default.
General information about the list,ways to join, leave and set
options is
at:
//www.freelists.org/list/SmartVisionAU
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
******************************************************
To post to SmartVisionAU, send email to:
SmartVisionAU@xxxxxxxxxxxxx
Replies to emails on this list will go to the list by default.
General information about the list,ways to join, leave and set options is at:
//www.freelists.org/list/SmartVisionAU