[sib-access] Re: Follow-up to chord symbol request
- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Tue, 3 Feb 2009 18:35:04 -0000
Dave,
All you would need to do to have a chord symbol move so that you would need
to press Tab instead of Shift+Tab is select it, remove the move restriction
and press right arrow once.
Dan Rugman
visit the new on-line resource for visually impaired musicians and home of
Sibelius Access.
www.musicaccess.co.uk
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson
Sent: 24 January 2009 05:58
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Re: Follow-up to chord symbol request
Claudio,
Intuitive. That's certainly something to consider. If, for example the
author decided to shift all the chord symbols slightly to the right they
could have selected them as a group and then, as you suggest moved them all
a bit to one side and therefore moved them out of the usual capture range of
the mouse drag-and-drop.
Good detective work.
Dave
----- Original Message -----
From: "Claudio Sacco" <cl.sacco@xxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: January 23, 2009 9:48 PM
Subject: [sib-access] Re: Follow-up to chord symbol request
Mayby the chord symbols have been attached to the wrong note and have been
moved to their right places with the mouse.
Claudio
-----Original Message-----
From: sib-access-bounce@xxxxxxxxxxxxx
[mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Gibbs
Sent: Friday, January 23, 2009 9:10 PM
To: sib-access@xxxxxxxxxxxxx
Subject: [sib-access] Follow-up to chord symbol request
I found the chord symbols. The guy who prepared the score wrote them below
the treble clef staff of a piano part instead of above the bass clef of the
same. The net effect is to put the chord symbols between staves but not
where I expected them. That said, I still have a problem. If I go to bar 2
of the score in the right hand staff and shift tab, I go to the last chord
symbol in bar 1 of the part, not the first chord symbol of bar 2 of the
part. And, I can only read the chords in bar 1 before being put back on the
bar rest in bar 2. I still need a recipe for putting myself on the first
chord of a bar and, from there, being able to continue through all the
chords of the part. Still don't know how to do that.
Kevin
If you wish to unsubscribe, send a blank message with the single word,
unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
