[SI-LIST] SPECCTRAQuest: DC level shift with series caps
- From: "Hassan O. Ali" <hassan@xxxxxxxx>
- To: si-list@xxxxxxxxxxxxx
- Date: Wed, 13 Mar 2002 09:49:13 -0500
Hi All,
I'm trying to use SigXplorer to simulate a link with a differential
driver and series DC-blocking caps. Contrary to expectations,
single-ended P and N outputs measured at the load are not centered
around 0V DC, instead each one is given a separate DC shift. When I
remove the series caps, the output is as expected - centered around 0V
DC.
Does anybody know what I can do to have the correct single-ended outputs
with the series caps?
Thanks.
Hassan.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
