I was told recently that in order to help reduce radiated emissions in HDMI signals, routed from a PCB to an HDMI connector, that it was better to route the signals at 85 Ohms differential as opposed to 100 Ohms differential. The contention was that with added connector L/C the overall average impedance normalized closer to 100 Ohms. Is there any credence to this? Is there any research material that agrees with this? (Hi Nazish) Thank You Tom ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu