**Browse: **Last Month: 11-2012 Main Archive Page Next Month: 01-2013

By Date **/** By Date Reverse **/** By Threads

- » [SI-LIST] Re: Skin effect and Inductance - Asbenson, Lyndell L
- » [SI-LIST] DDR3 controller internal package delay Considerlation - pishang li
- » [SI-LIST] Re: DDR3 controller internal package delay Considerlation - steve weir
- » [SI-LIST] Re: DDR3 controller internal package delay Considerlation - pishang li
- » [SI-LIST] Re: How can we get the resonance frequency and Q between the package and the board from Z11? - luping liu
- » [SI-LIST] REï¼How can we get the resonance frequency and Q between - luping liu
- » [SI-LIST] Re: How can we get the resonance frequency and Q between the package and the board from Z11? - Ihsan Erdin
- » [SI-LIST] Re: Skin effect and Inductance - sreekanth soman
- » [SI-LIST] Re: DDR3 controller internal package delay Considerlation - kesir
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - steve weir
- » [SI-LIST] Re: DDR3 controller internal package delay Considerlation - pishang li
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - Michael Greim
- » [SI-LIST] 4 Layer card with blind & buried via's - sunil bharadwaz
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - Wolfgang.Maichen
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - steve weir
- » [SI-LIST] AW: 4 Layer card with blind & buried via's - Havermann, Gert
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - Bill Hargin (ICD)
- » [SI-LIST] Re: What is the clamp voltage of ESD protection device - Ram Chundru
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - Prasad Mangipudi
- » [SI-LIST] çå¤: What is the clamp voltage of ESD protection device - Zhenwei Wang (zhenwwan)
- » [SI-LIST] Re: AW: Board Hangs due to Cable contact - Jaison Fernandez
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - sunil bharadwaz
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - sunil bharadwaz
- » [SI-LIST] Re: 4 Layer card with blind & buried via's - Tayyab Rahimkhan Pathan
- » [SI-LIST] Help - Joy Christian
- » [SI-LIST] Re: Help - steve weir
- » [SI-LIST] Re: Help - Traa, Boris
- » [SI-LIST] Re: Help - steve weir
- » [SI-LIST] characteric impedance - Zhang Tony
- » [SI-LIST] Re: characteric impedance - Traa, Boris
- » [SI-LIST] Re: characteric impedance - Zhang Tony
- » [SI-LIST] Re: characteric impedance - O. Laney
- » [SI-LIST] Re: Help - Shiva Jilla
- » [SI-LIST] Help_SIW_Technology - Hamid BOUYGHF
- » [SI-LIST] Re: Help_SIW_Technology - O. Laney
- » [SI-LIST] Re: [PCB_FORUM] Help_SIW_Technology - deHorsey, Thurlow
- » [SI-LIST] Re: characteric impedance - Long Yang
- » [SI-LIST] Re: characteric impedance - Long Yang
- » [SI-LIST] Re: characteric impedance - Brian Rautio
- » [SI-LIST] Re: characteric impedance - gary_otonari
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - Luping LIU
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - steve weir
- » [SI-LIST] Re: characteric impedance - Zhang Tony
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - Tesla
- » [SI-LIST] Help - Joy Christian
- » [SI-LIST] Re: Help - Shiva Jilla
- » [SI-LIST] Re: REï¼How can we get the resonance frequency and Q between - Istvan Novak
- » [SI-LIST] Re: characteric impedance - Robin
- » [SI-LIST] Re: characteric impedance - Traa, Boris
- » [SI-LIST] Re: REÃ¯Â¼Å¡How can we get the resonance frequency and Q betwee - Luping LIU
- » [SI-LIST] DC blocking caps with more loss - Rick Brooks (ricbrook)
- » [SI-LIST] Summary of my 78 EMC related papers and articles - Doug Smith
- » [SI-LIST] how to set the reference of port in siwave - l
- » [SI-LIST] how to set the reference of port in siwave - l
- » [SI-LIST] Re: how to set the reference of port in siwave - Lucian Zhang
- » [SI-LIST] Re: how to set the reference of port in siwave - l
- » [SI-LIST] Re: REÃ¯Â¼Å¡How can we get the resonance frequency and Q betwee - Istvan Novak
- » [SI-LIST] Re: DC blocking caps with more loss - EverettA
- » [SI-LIST] IBIS Summit at DesignCon 2013 - First Call for Participation and Presentations - Mirmak, Michael
- » [SI-LIST] IBIS-AMI Vs IBIS model - bala
- » [SI-LIST] A question about the radius of via hole structure - fangod
- » [SI-LIST] Re: IBIS-AMI Vs IBIS model - colin_warwick
- » [SI-LIST] Re: IBIS-AMI Vs IBIS model - Muranyi, Arpad
- » [SI-LIST] Determination RLC value of a pin - Siddharth Rajagopalan
- » [SI-LIST] Re: Determination RLC value of a pin - Lynne C. Green
- » [SI-LIST] Inductance of parallel plate capacitors in series - Andreas Hahn
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - steve weir
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - Traa, Boris
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - Andreas Hahn
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - Andreas Hahn
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - steve weir
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - Traa, Boris
- » [SI-LIST] Re: Inductance of parallel plate capacitors in series - Yuriy Shlepnev
- » [SI-LIST] Re: Determination RLC value of a pin - Ray Anderson
- » [SI-LIST] Routing High Speed over partial GND & partial split plane references - Rubinstein, Joseph
- » [SI-LIST] Re: Determination RLC value of a pin - Tom Dagostino
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Ken Wyatt
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - N. Paul Taddonio
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Yuriy Shlepnev
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Scott McMorrow
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Stefan Milnor
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Bradley Brim
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Carrier, Patrick
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Loyer, Jeff
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Loyer, Jeff
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Scott McMorrow
- » [SI-LIST] Re: Routing High Speed over partial GND & partial split plane references - Vinu Arumugham
- » [SI-LIST] Low voltage high Speed clock genrator - XiaoLiang Tan
- » [SI-LIST] Re: Low voltage high Speed clock genrator - steve weir
- » [SI-LIST] Re: Low voltage high Speed clock genrator - sone@xxxxxxxxxxx
- » [SI-LIST] Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - miner_tom Cipollone
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Tesla
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - steve weir
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms - Sen Velmurugan
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms - Michael Greim
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Loyer, Jeff
- » [SI-LIST] (no subject) - miner_tom Cipollone
- » [SI-LIST] Re: (no subject) - Lee
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Traa, Boris
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Lee
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Joseph . Schachner
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Lee
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Loyer, Jeff
- » [SI-LIST] Re: DDR3 controller internal package delay Considerlation - jackle zheng
- » [SI-LIST] USB2 Host Rx Sensitivity - vinod ah
- » [SI-LIST] Help - Joy Christian
- » [SI-LIST] AW: Help - Havermann, Gert
- » [SI-LIST] Re: Help - Orin Laney
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Michael Vrbanac
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Michael Vrbanac
- » [SI-LIST] Re: Help - Yuriy Shlepnev
- » [SI-LIST] Call for Papers - IEEE 2013 SPI - Kuhns, Karen
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms - Michael Vrbanac
- » [SI-LIST] Re: Call for Papers - IEEE 2013 SPI - Beal, Weston
- » [SI-LIST] CALL FOR PAPERS - IEEE 2013 SPI - Kuhns, Karen
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Lee
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Vinu Arumugham
- » [SI-LIST] A common mode current on differential PCB pair cause EMI? - Tesla
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Orin Laney
- » [SI-LIST] Re: Call for Papers - IEEE 2013 SPI - Hal Murray
- » [SI-LIST] Non Causality problem in HyperLynx Touchstone Viewer - SughiRam P.
- » [SI-LIST] AW: Call for Papers - IEEE 2013 SPI - Havermann, Gert
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Traa, Boris
- » [SI-LIST] AW: A common mode current on differential PCB pair cause EMI? - Havermann, Gert
- » [SI-LIST] Re: A common mode current on differential PCB pair cause EMI? - steve weir
- » [SI-LIST] voltage attenuation - XiaoLiang Tan
- » [SI-LIST] Re: voltage attenuation - steve weir
- » [SI-LIST] Re: voltage attenuation - Tesla
- » [SI-LIST] Re: AW: A common mode current on differential PCB pair cause EMI? - Tesla
- » [SI-LIST] Re: AW: A common mode current on differential PCB pair cause EMI? - Tesla
- » [SI-LIST] Re: AW: A common mode current on differential PCB pair cause EMI? - Tesla
- » [SI-LIST] AW: Re:AW: A common mode current on differential PCB pair cause EMI? - Havermann, Gert
- » [SI-LIST] Re: AW: Re:AW: A common mode current on differential PCB pair cause EMI? - Tesla
- » [SI-LIST] PLL PPM Both positive and negative - vinod ah
- » [SI-LIST] LVPCEL CLK generator - XiaoLiang Tan
- » [SI-LIST] Re: Non Causality problem in HyperLynx Touchstone Viewer - Carrier, Patrick
- » [SI-LIST] Re: Routing diff pair HDMI signals at 85 Ohms as opposed to 100 Ohms reduces radiation? - Orin Laney
- » [SI-LIST] Re: LVPCEL CLK generator - SughiRam P.
- » [SI-LIST] Re: LVPCEL CLK generator - steve weir
- » [SI-LIST] Re: PLL PPM Both positive and negative - steve weir
- » [SI-LIST] Re: Non Causality problem in HyperLynx Touchstone Viewer - Scott McMorrow
- » [SI-LIST] On traces referenced to power not ground - question. - Grasso, Charles
- » [SI-LIST] AW: AW: Help - Havermann, Gert
- » [SI-LIST] Re: Non Causality problem in HyperLynx Touchstone Viewer - Ken Cantrell
- » [SI-LIST] Re: Non Causality problem in HyperLynx Touchstone Viewer - Muranyi, Arpad
- » [SI-LIST] Re: AW: Help - herman_westra
- » [SI-LIST] Re: si-list Digest V12 #387 - Dmitriev-Zdorov, Vladimir
- » [SI-LIST] Re: AW: AW: Help - Yuriy Shlepnev
- » [SI-LIST] Re: On traces referenced to power not ground - question. - steve weir
- » [SI-LIST] Re: LVPCEL CLK generator - sone@xxxxxxxxxxx
- » [SI-LIST] Re: USB2 Host Rx Sensitivity - vinod ah
- » [SI-LIST] Re: PLL PPM Both positive and negative - Tesla
- » [SI-LIST] would vsense pin make us not worry about DC IR Drop for PI - Tesla
- » [SI-LIST] Re: USB2 Host Rx Sensitivity - Sharma, Rajeev
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - Istvan Novak
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - steve weir
- » [SI-LIST] Reg: Noise analysis in Cadence - si
- » [SI-LIST] Re: Reg: Noise analysis in Cadence - steve weir
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - Tesla
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - Recht
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - Balajy Kumar -ERS, HCL Tech
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - kesir
- » [SI-LIST] Re: DC threshold multicross, undershoot and overshoot query - Balajy Kumar -ERS, HCL Tech
- » [SI-LIST] Re: would vsense pin make us not worry about DC IR Drop for PI - Orin Laney
- » [SI-LIST] Ferrite bead in ground path - Hithesh
- » [SI-LIST] Re: Ferrite bead in ground path - Kevin G. Rhoads
- » [SI-LIST] Re: Ferrite bead in ground path - steve weir
- » [SI-LIST] Re: Ferrite bead in ground path - Ken Wyatt
- » [SI-LIST] Re: Ferrite bead in ground path - Gary Stein
- » [SI-LIST] Re: Ferrite bead in ground path - Ivor Bowden
- » [SI-LIST] Re: Ferrite bead in ground path - Lee
- » [SI-LIST] Re: Ferrite bead in ground path - Orin Laney
- » [SI-LIST] Re: Ferrite bead in ground path - Hithesh
- » [SI-LIST] Fw: Ferrite bead in ground path - Joseph . Schachner
- » [SI-LIST] Re: Ferrite bead in ground path - steve weir
- » [SI-LIST] Re: Fw: Ferrite bead in ground path - Hithesh
- » [SI-LIST] Re: Ferrite bead in ground path - steve weir
- » [SI-LIST] Re: Ferrite bead in ground path - Prashant Jaiswar
- » [SI-LIST] IBIS Summit at DesignCon 2013 - Second Call for Participation and Presentations - Mirmak, Michael
- » [SI-LIST] Re: Ferrite bead in ground path - ææ
- » [SI-LIST] Re: Ferrite bead in ground path - Lucci, Christopher
- » [SI-LIST] Re: Ferrite bead in ground path - Istvan Novak
- » [SI-LIST] Re: Ferrite bead in ground path - Istvan Nagy
- » [SI-LIST] Re: Ferrite bead in ground path - steve weir
- » [SI-LIST] termination resistor - XiaoLiang Tan
- » [SI-LIST] Re: termination resistor - Lynne C. Green
- » [SI-LIST] Re: termination resistor - Orin Laney
- » [SI-LIST] Re: termination resistor - steve weir
- » [SI-LIST] Re: termination resistor - Lambert Simonovich
- » [SI-LIST] Re: termination resistor - Tesla
- » [SI-LIST] Re: termination resistor - steve weir
- » [SI-LIST] Re: termination resistor - XiaoLiang Tan
- » [SI-LIST] Re: termination resistor - Lambert Simonovich
- » [SI-LIST] Single-point grounding and multi-point grounding - Tesla
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - Elya B. Joffe
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - steve weir
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - steve weir
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - Istvan Novak
- » [SI-LIST] Modeling SSN Noise - Jason wu
- » [SI-LIST] Modelling SSN noise - Jason wu
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - Lynne C. Green
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - steve weir
- » [SI-LIST] Re: Single-point grounding and multi-point grounding - Lynne C. Green
- » [SI-LIST] crystal input - XiaoLiang Tan
- » [SI-LIST] Re: crystal input - Li Hui
- » [SI-LIST] Re: crystal input - XiaoLiang Tan
- » [SI-LIST] Re: crystal input - vinod ah
- » [SI-LIST] Re: crystal input - A. Ingraham
- » [SI-LIST] DDR3 Crosstalk - bala