[SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" error with Hyperlinx 8.2
- From: keithK EPD <epd2001usa@xxxxxxxxxxx>
- To: <george.q.jiang@xxxxxxxxxx>, <mfilion@xxxxxxxxxxxxxxx>, <manojkumarc@xxxxxxx>
- Date: Wed, 9 May 2012 20:23:26 -0400
This is definitely a bug in translation of the *.hyp file you may be able to
edit this text file in a way which is a close approximation of what you
desire....obviously , a circle is not right
Keith Kowal
www.product-designs.com
> From: george.q.jiang@xxxxxxxxxx
> To: mfilion@xxxxxxxxxxxxxxx; manojkumarc@xxxxxxx
> CC: si-list@xxxxxxxxxxxxx
> Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" error
> with Hyperlinx 8.2
> Date: Wed, 9 May 2012 17:37:15 +0000
>
> I have had same problem with HyperLynx. It is a defect of the tool.
>
> George Jiang
> Delphi Electronics & Safety
> Kokomo, IN 46902
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
> Behalf Of Marc-André Filion
> Sent: Wednesday, May 09, 2012 1:28 PM
> To: manojkumarc@xxxxxxx
> Cc: 'SI-LIST'
> Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" error
> with Hyperlinx 8.2
>
> Hi,
> I've recall having an issue with some special shape for mechanical retention.
> I had a net0 that was shorting the power and GND in the hyperlynx database.
> The board shape was a little special and the translation convert it into a
> circle. This circle shorted many net (including power and GND). I had to
> remove net0 from your .hyp database. In my case, Hyperlynx was just shutting
> down.
>
> Maybe you should look at all unusual stuff on your board the could short your
> power together.
>
> Regards,
>
> Marc-André Filion, ing
> Concepteur Matériel / Hardware Designer
> Brioconcept Consulting Inc.
> 450.681.2779 x2368
>
>
> -----Original Message-----
> From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
> Behalf Of Manojkumar Chidambaram - ERS, HCL Tech
> Sent: 9 mai 2012 13:04
> To: SI-LIST (si-list@xxxxxxxxxxxxx)
> Subject: [SI-LIST] PI simulation "unrecoverable and unidentifiable" error
> with Hyperlinx 8.2
>
> Hi All,
>
> I am helping out one of my colleague for decoupling analysis with hyperlynx
> 8.2. When tried simulating in boardsim few of the rails (1.8V, VDD1, VDD2
> rails) in the board reported an error pointing out that the error is
> "unrecoverable and unidentifiable".
>
> The same power rails when exported to the Linesim had problems with different
> nets merging together reported as "Net 1.8V and GND are connected and will be
> combined to single net "GND_1.8V"
> But as per layout this net is clean.
>
> Is there anyone faced similar issue, please share your thoughts. Thanks!
>
>
> Thanks,
> Manoj
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
> ****************************************************************************************
> Note: If the reader of this message is not the intended recipient, or an
> employee or agent responsible for delivering this message to the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited. If you have received
> this communication in error, please notify us immediately by replying to the
> message and deleting it from your computer. Thank you.
> ****************************************************************************************
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>
> List forum is accessible at:
> http://tech.groups.yahoo.com/group/si-list
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List forum is accessible at:
http://tech.groups.yahoo.com/group/si-list
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
