Manoj, Did u try this in cadence...if u get same error while using cadence also,then u ll come to know where the problem is...use sigrity otherwise... -bala On May 10, 2012 5:57 AM, "keithK EPD" <epd2001usa@xxxxxxxxxxx> wrote: > This is definitely a bug in translation of the *.hyp file you may be able > to edit this text file in a way which is a close approximation of what you > desire....obviously , a circle is not right > > > Keith Kowal > > www.product-designs.com > > > > > From: george.q.jiang@xxxxxxxxxx > > To: mfilion@xxxxxxxxxxxxxxx; manojkumarc@xxxxxxx > > CC: si-list@xxxxxxxxxxxxx > > Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > Date: Wed, 9 May 2012 17:37:15 +0000 > > > > I have had same problem with HyperLynx. It is a defect of the tool. > > > > George Jiang > > Delphi Electronics & Safety > > Kokomo, IN 46902 > > > > -----Original Message----- > > From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] > On Behalf Of Marc-André Filion > > Sent: Wednesday, May 09, 2012 1:28 PM > > To: manojkumarc@xxxxxxx > > Cc: 'SI-LIST' > > Subject: [SI-LIST] Re: PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > > > Hi, > > I've recall having an issue with some special shape for mechanical > retention. I had a net0 that was shorting the power and GND in the > hyperlynx database. The board shape was a little special and the > translation convert it into a circle. This circle shorted many net > (including power and GND). I had to remove net0 from your .hyp database. In > my case, Hyperlynx was just shutting down. > > > > Maybe you should look at all unusual stuff on your board the could short > your power together. > > > > Regards, > > > > Marc-André Filion, ing > > Concepteur Matériel / Hardware Designer > > Brioconcept Consulting Inc. > > 450.681.2779 x2368 > > > > > > -----Original Message----- > > From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] > On Behalf Of Manojkumar Chidambaram - ERS, HCL Tech > > Sent: 9 mai 2012 13:04 > > To: SI-LIST (si-list@xxxxxxxxxxxxx) > > Subject: [SI-LIST] PI simulation "unrecoverable and unidentifiable" > error with Hyperlinx 8.2 > > > > Hi All, > > > > I am helping out one of my colleague for decoupling analysis with > hyperlynx 8.2. When tried simulating in boardsim few of the rails (1.8V, > VDD1, VDD2 > > rails) in the board reported an error pointing out that the error is > "unrecoverable and unidentifiable". > > > > The same power rails when exported to the Linesim had problems with > different nets merging together reported as "Net 1.8V and GND are connected > and will be combined to single net "GND_1.8V" > > But as per layout this net is clean. > > > > Is there anyone faced similar issue, please share your thoughts. Thanks! > > > > > > Thanks, > > Manoj > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > > **************************************************************************************** > Note: If the reader of this message is not the intended recipient, or an > employee or agent responsible for delivering this message to the intended > recipient, you are hereby notified that any dissemination, distribution or > copying of this communication is strictly prohibited. If you have received > this communication in error, please notify us immediately by replying to > the message and deleting it from your computer. Thank you. > **************************************************************************************** > > ------------------------------------------------------------------ > > To unsubscribe from si-list: > > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > > > or to administer your membership from a web page, go to: > > //www.freelists.org/webpage/si-list > > > > For help: > > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > > > > List forum is accessible at: > > http://tech.groups.yahoo.com/group/si-list > > > > List archives are viewable at: > > //www.freelists.org/archives/si-list > > > > Old (prior to June 6, 2001) list archives are viewable at: > > http://www.qsl.net/wb6tpu > > > > > > ------------------------------------------------------------------ > To unsubscribe from si-list: > si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field > > or to administer your membership from a web page, go to: > //www.freelists.org/webpage/si-list > > For help: > si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field > > > List forum is accessible at: > http://tech.groups.yahoo.com/group/si-list > > List archives are viewable at: > //www.freelists.org/archives/si-list > > Old (prior to June 6, 2001) list archives are viewable at: > http://www.qsl.net/wb6tpu > > > ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List forum is accessible at: http://tech.groups.yahoo.com/group/si-list List archives are viewable at: //www.freelists.org/archives/si-list Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu