[SI-LIST] Measuring Power supply Ripple and Noise
- From: "Jaison Fernandez" <jaisonf@xxxxxxxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 13 Nov 2008 12:16:08 +0530
Hai all,
I am trying to characterize the power integrity of of a board (that having a
system clock running at 400Mhz and DDR memory)
What is the type of probe (Single ended or differential) is best suited for
measuring power supply ripple and noise in the board.(I am using Tek GHz
Oscilloscope for this purpose)
Can any one give any document regarding measuring power integrity of a
board.
With Warm Regards,
JAISON FERNANDEZ
The information contained in this electronic message and any attachments to
this message are intended for the exclusive use of the addressee(s) and may
contain proprietary, confidential or privileged information. If you are not the
intended recipient, you should not disseminate, distribute or copy this e-mail.
Please notify the sender immediately and destroy all copies of this message and
any attachments contained in it.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
