[SI-LIST] Is Impedance Enough for Describing the PDS?
- From: zhangkun 29902 <zhang_kun@xxxxxxxxxx>
- To: "si-list@xxxxxxxxxxxxx" <si-list@xxxxxxxxxxxxx>
- Date: Fri, 09 Jul 2004 08:04:22 +0800
Dear all
When talking about power delivery system with other engineer, there are a lot
of element to describe the PDS, such as energy storage, decoupling, bypassing,
and so on. I think all these parameter could be described by one element,
impedance of PDS.
Is my point right? Is impedance enough for describing the PDS?
Best Regards
Zhangkun
2004.7.9
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
